| 存储盒盖内侧抽芯注射模设计 |
| |
| 引用本文： | 邹继强. 存储盒盖内侧抽芯注射模设计[J]. 模具制造, 2014, 14(11): 53-59 |
| |
| 作者姓名： | 邹继强 |
| |
| 作者单位： | 昆山登云学院机电系模具教研室 江苏昆山215300 |
| |
| 摘 要： | 简要介绍了一种用摆钩板脱点浇口的简易二板二次分型结构;一种用带斜面的平移式推板,在推出塑件的同时,在水平分力作用下平移,从而完成两内侧抽芯脱模的典型结构。
|
| 关 键 词： | 二板点浇口 摆钩板 平移式内侧抽芯 注射模 |
Design of Inside Core-Pulling Injection Mold for the Storage Box Lid |
| |
| Abstract: | The paper introduces a kind of use the pendulum hook plate out of point gate ofsimple junior secondary classification structure; a translation with bevel type push plate, theintroduction of products at the same time, under the action of horizontal component of thetranslation, so as to complete two typical structure in the inner core-drawing demoulding. |
| |
| Keywords: | junior point gate the pendulum hook plate horizontally inside core-pulling injection mold |
| 本文献已被 CNKI 维普 等数据库收录！ |
