Kinematic errors on helical gear of triple circular-arc teeth |
| |
Authors: | Xiao-Shun Xie Hsueh-Cheng Yang |
| |
Affiliation: | 1. Department of Industrial Education and Technology, National Changhua University of Education, Bao-Shan Campus, Number 2, Shi-Da Road, Changhua, 500, Taiwan, R.O.C. 2. Graduate Institute of Vehicle Engineering, National Changhua University of Education, Bao-Shan Campus, Number 2, Shi-Da Road, Changhua, 500, Taiwan, R.O.C.
|
| |
Abstract: | Two imaginary skew rack cutter curves with stepped triple circular-arc teeth are presented in this paper. A helical gear pair that includes the gear and pinion surfaces was generated by using two matched imaginary skew rack cutter surfaces. The mathematical models of the helical gear pair with stepped triple circular-arc teeth were developed based on theory of gearing. With the use of these models, the analysis of kinematic errors can be illustrated and evaluated by computer programming and tooth contact analysis (TCA). The assembly errors used had several kinds: ideal assembly errors, vertical misalignment angles, horizontal misalignment angles, manufacturing errors of helical angles, and center distance deviation. TCA revealed that the sensitivity of horizontal misalignment angles was lower than that of manufacturing errors of helix angles but higher than that of vertical misalignment angles. |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|