| 用倒锥形测头测量蜗杆及滚刀齿形的测头半径补偿 |
| |
| 引用本文： | 王建华,林其骏.用倒锥形测头测量蜗杆及滚刀齿形的测头半径补偿[J].西安工业学院学报,1993,13(3):169-175. |
| |
| 作者姓名： | 王建华 林其骏 |
| |
| 作者单位： | 西安工业学院，西安交大，重庆工具厂，重庆工具厂 |
| |
| 摘 要： | 根据倒锥形测头中心的轨迹曲线,分析了测量接触点与测头中心的相对位置关系。提出消除由于测头半径所引起的测量误差的原理,并给出了圆弧齿轮滚刀的齿形测量实例。
|
| 关 键 词： | 蜗杆 滚刀 测量 齿形 倒锥形 测头 |
Compensation of the Radius of Probe for Measuring the Profile of Worm and Hob by Conical Probe |
| |
| Wang Jianhua Lin Qijun Zhou Shuji Li Jianyi.Compensation of the Radius of Probe for Measuring the Profile of Worm and Hob by Conical Probe[J].Journal of Xi'an Institute of Technology,1993,13(3):169-175. |
| |
| Authors: | Wang Jianhua Lin Qijun Zhou Shuji Li Jianyi |
| |
| Affiliation: | Wang Jianhua Lin Qijun Zhou Shuji Li Jianyi |
| |
| Abstract: | According to the center trace of conical probe, the relationship between the probe center and the contact point is analyzed. A new compensation method of radius of probe is proposed. Then an example is shown. |
| |
| Keywords: | worm hob measurement compensation |
| 本文献已被 CNKI 维普 等数据库收录！ |
