Solid circulation and gas bypassing characteristics in a square internally circulating fluidized bed with draft tube |
| |
Authors: | Jin Hee Jeon Sang Done Kim Seung Jae Kim Yong Kang |
| |
Affiliation: | aDepartment of Chemical and Biomolecular Engineering, Energy and Environment Research Center, Korea Advanced Institute of Science and Technology, Daejeon 305-701, Republic of Korea;bDepartment of Environmental Engineering, Chonnam National University, Gwangju 505-757, Republic of Korea;cSchool of Chemical Engineering, Chungnam National University, Daejeon 305-764, Republic of Korea |
| |
Abstract: | The effects of gas velocities to draft tube (26.64–52.54 cm/s) and to annulus section (8.14–11.84 cm/s) on solid circulation rate and gas bypassing fractions were determined in a square internally circulating fluidized bed reactor with an orifice-type square draft tube. The solid circulation rate and gas bypassing fraction from the annulus section to the draft tube increase but gas bypassing fraction from the draft tube to the annulus section decreases with increasing gas velocity to the draft tube. With increasing gas velocity to the annulus section, the solid circulation rate and gas bypassing fraction from the draft tube to the annulus section increase but, gas bypassing fraction from the annulus section to the draft tube decreases. The solids circulation rate was correlated with the pressure drop across the orifice and the opening area ratio based on the orifice theory. The gas bypassing fraction was correlated with gas velocities to the fluidized and the moving beds. Based on the gas bypassing fraction data, the gas flow rates across the orifice were correlated with gas velocities to the fluidized and the moving beds, opening area ratio, particle size and solids height in the bed. |
| |
Keywords: | Internally circulating fluidized bed Solid circulation rate Gas bypassing fraction |
本文献已被 ScienceDirect 等数据库收录! |
|