| 冷却速率对ZA35-0.3Sr合金组织和性能的影响 |
| |
| 引用本文： | 刘敬福,郎惠珍,杨光,高志玉.冷却速率对ZA35-0.3Sr合金组织和性能的影响[J].兵器材料科学与工程,2014(3):28-30. |
| |
| 作者姓名： | 刘敬福 郎惠珍 杨光 高志玉 |
| |
| 作者单位： | 辽宁工程技术大学材料科学与工程学院; |
| |
| 基金项目： | 辽宁省创新团队项目(2008T137);辽宁工程技术大学博士基金项目(0994) |
| |
| 摘 要： | 利用水平Bridgman定向凝固装置,对ZA35-0.3Sr合金进行定向凝固实验,研究冷却速率对ZA35-0.3Sr合金组织和性能的影响。结果表明:在牵引速率为200μm/s条件下,定向凝固ZA35-0.3Sr合金组织由枝晶向等轴晶转变,晶粒细化效果显著,当载荷为120 N,合金磨损率最低,为0.014 9 g/(s·m2);牵引速率增大,合金硬度先升高后下降,牵引速率为200μm/s,合金硬度最大,为132HB。
|
| 关 键 词： | ZA35-0.3Sr合金 冷却速率 二次枝晶臂间距 硬度 耐磨损性能 |
Effects of cooling rate on microstructure and property of ZA35-0.3Sr alloy |
| |
| LIU Jingfu;LANG Huizhen;YANG Guang;GAO Zhiyu.Effects of cooling rate on microstructure and property of ZA35-0.3Sr alloy[J].Ordnance Material Science and Engineering,2014(3):28-30. |
| |
| Authors: | LIU Jingfu;LANG Huizhen;YANG Guang;GAO Zhiyu |
| |
| Affiliation: | LIU Jingfu;LANG Huizhen;YANG Guang;GAO Zhiyu;School of Materials Science and Engineering,Liaoning Technical University; |
| |
| Abstract: | ZA35-0.3Sr alloy was fabricated by using horizontal Bridgman directional solidification equipment. The effects of cooling rate on the microstructure and properties of ZA35-0.3Sr alloy were studied. The results show that when the traction rate is 200 μm/s,the microstructure of directional solidified ZA35-0.3Sr alloy transforms from dendrite to equiaxed crystalline,and the effect of grain refinement is significant. The hardness of alloy firstly increases and then decreases with the increase of traction rate. The hardness of alloy reaches the maximum of 132HB when the traction rate is 200 μm/s. The lowest wear rate of alloy is 0.014 9 g/(s·m2)when the load is 120 N and traction rate is 200 μm/s. |
| |
| Keywords: | ZA35-0 3Sr alloy cooling rate second dendrite arm spacing hardness wear resistance |
| 本文献已被 CNKI 等数据库收录！ |
