首页 | 本学科首页   官方微博 | 高级检索  
     

装甲钢CO2气体保护焊焊接接头组织和抗裂性分析
引用本文:朱晓莹,谭伟,赵阳.装甲钢CO2气体保护焊焊接接头组织和抗裂性分析[J].焊接学报,2007,28(7):94-96.
作者姓名:朱晓莹  谭伟  赵阳
作者单位:装甲兵工程学院,装备再制造技术国防科技重点实验室,北京,100072
摘    要:采用自制H10MnSi和H08Mn2Si焊丝分别制备装甲钢CO2气体保护焊焊接接头,通过金相显微镜、扫描电子显微镜和显微硬度计对装甲钢焊接接头组织及其硬度分布进行对比研究;通过斜Y形坡口焊接裂纹试验评定了自制H10MnSi焊丝和H08Mn2Si焊丝的抗裂性倾向.结果表明,在H08Mn2Si焊丝基础上改进的自制H10MnSi焊丝应用于装甲钢CO2气体保护焊时,其焊缝组织细化,针状铁素体比例明显高于H08Mn2Si焊丝,这使得H10MnSi焊丝的抗裂性优于H08Mn2Si焊丝.

关 键 词:装甲钢  CO2气体保护焊  组织  抗裂性
文章编号:0253-360X(2007)07-094-03
收稿时间:2006/8/28 0:00:00
修稿时间:2006-08-28

Microstructures and crack resistance of armoured steel weldment by CO2 shielded arc welding
ZHU Xiaoying,TAN Wei and ZHAO Yang.Microstructures and crack resistance of armoured steel weldment by CO2 shielded arc welding[J].Transactions of The China Welding Institution,2007,28(7):94-96.
Authors:ZHU Xiaoying  TAN Wei and ZHAO Yang
Affiliation:National Key Laboratory for Remanufacturing, Academy of Armord Forces Engineering, Beijing 100072, China,National Key Laboratory for Remanufacturing, Academy of Armord Forces Engineering, Beijing 100072, China and National Key Laboratory for Remanufacturing, Academy of Armord Forces Engineering, Beijing 100072, China
Abstract:The armoured steel welded joints were prepared by CO2 shielded arc welding with modified H10MnSi wire and H08Mn2Si wire respectively. The microstructures of the welded joints were examined by means of Olympus optical microscope and scanning electron microscope. And the Vickers microhardness profiles were measured by Vickers microhardness tester. The crack resistance in Y-groove welded joints was also compared. The experiment results showed that the crack resistance of the welded joint using H10MnSi wire was better than that of the weldment using H08Mn2Si wire, which is mainly due to the fine crystal grain in the weld metal and the more content of acicular ferrite.
Keywords:armoured steel  CO2 shielded arc welding  microstructure  crack resistance
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《焊接学报》浏览原始摘要信息
点击此处可从《焊接学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号