| 喷油器的匹配计算 |
| |
| 引用本文： | 丁技峰,付海燕,强永平. 喷油器的匹配计算[J]. 机械工程与自动化, 2007, 0(6): 11-13 |
| |
| 作者姓名： | 丁技峰 付海燕 强永平 |
| |
| 作者单位： | 1. 中北大学,山西,太原,030051
2. 中国北方发动机研究所,山西,大同,037036 |
| |
| 摘 要： | 利用发动机工作过程模拟软件AVLBOOST对12缸柴油机的工作过程进行了模拟分析，在原型机的仿真计算结果与试验值符合较好的前提下，提出了综合考虑燃烧室形状、涡流比及喷孔配置等多因素的最优配置方法。试验结果表明，所提出的优化方案是可行的。
|
| 关 键 词： | 柴油机 热力循环模拟 喷油器 |
| 文章编号： | 1672-6413（2007）06-0011-03 |
| 收稿时间： | 2007-03-06 |
| 修稿时间： | 2007-08-12 |
Optimized Matching of Injector |
| |
| DING Ji-feng,FU Hai-yan,QIANG Yong-ping. Optimized Matching of Injector[J]. Mechanical Engineering & Automation, 2007, 0(6): 11-13 |
| |
| Authors: | DING Ji-feng FU Hai-yan QIANG Yong-ping |
| |
| Abstract: | A calculation of thermodynamic cycle of a twelve cylinder diesel is made by thermodynamic simulation tool AVL BOOST. On the basis of the correspondence of the calculated values with the testing values ,some optimized designs are proposed ,in which various aspects of the interaction of spray propagation and combustion with chamber geometry,turbine intensity and injection holes are taken into account. As shown by test results,the optimized designs are feasible. |
| |
| Keywords: | diesel engine thermodynamic simulation injector |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
