| 基于薄壁矩形深腔体防变形数控加工工艺研究 |
| |
| 引用本文： | 丁学恭.基于薄壁矩形深腔体防变形数控加工工艺研究[J].现代制造工程,2006(7):79-81. |
| |
| 作者姓名： | 丁学恭 |
| |
| 作者单位： | 杭州技术学院,杭州,310018 |
| |
| 摘 要： | 薄壁矩形深腔体零件在加工、装配及库存过程中极易产生变形,由于工件材料、壁厚、刚性、装夹等多种原因,导致零件加工工艺编制的难度增加。通过实例从零件的变形理论分析、防变形工艺方法等角度出发研究了薄壁矩形深腔体零件的数控加工工艺。
|
| 关 键 词： | 薄壁深腔体 变形 数控加工 |
| 文章编号： | 1671-3133(2006)07-0079-03 |
| 修稿时间： | 2006年1月10日 |
The research of numeric processing technic of thin-wall rectangular deep recessed parts |
| |
| Ding Xuegong.The research of numeric processing technic of thin-wall rectangular deep recessed parts[J].Modern Manufacturing Engineering,2006(7):79-81. |
| |
| Authors: | Ding Xuegong |
| |
| Abstract: | For many reasons,such as material,wall thickness,rigidity,clamp etc,during the course of treatment,assemblage and inventory,thin-wall rectangular deep recessed parts tend to generate distortion,which induces increment of the processing technic establishing difficulty.By means of illustration,from the view of parts distortion theory analysis,distortion prevention,researches the numeric processing technic of thin-wall rectangular deep recessed parts. |
| |
| Keywords: | Thin-wall parts Distortion Numeric processing |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
