| 用PLC改造MAAG磨齿机 |
| |
| 引用本文： | 张宏生,王宁.用PLC改造MAAG磨齿机[J].制造技术与机床,1994(5):37-39. |
| |
| 作者姓名： | 张宏生 王宁 |
| |
| 作者单位： | 南京第二机床厂研究所 |
| |
| 摘 要： | 本文介绍了用ＰＬＣ取代原有控制元件，改造ＭＡＡＧ半自动齿轮磨床，达到并扩大原机床功能的成功经验。
|
| 关 键 词： | 磨齿机，改造方案 |
Use PLC to retrofit MAAG gear grinder |
| |
| Zhang Hongsheng.Use PLC to retrofit MAAG gear grinder[J].Manufacturing Technology & Machine Tool,1994(5):37-39. |
| |
| Authors: | Zhang Hongsheng |
| |
| Affiliation: | Zhang Hongsheng |
| |
| Abstract: | There are a lot of MAAG semi-automatic grinding machines controlled by relay logic device. Most of the matihines are still running but with some troubles. The article surposed a method to retrofit or reconstruct them as a new one. It is worthwhile in either case of economic or productivity. The MAAG semi-automatic gear grinding machines can be retrofit by PLC to replace the old control elements. The machine will be kept to or over the functions in former case. |
| |
| Keywords: | Gear grinder Retrofit |
| 本文献已被 CNKI 维普 等数据库收录！ |
