| 基于UG6.0的DMU125FD车铣复合加工中心后置处理的开发 |
| |
| 引用本文： | 蒋思宝,张宇,刘爽.基于UG6.0的DMU125FD车铣复合加工中心后置处理的开发[J].机械设计与制造工程,2011(5):37-40,45. |
| |
| 作者姓名： | 蒋思宝 张宇 刘爽 |
| |
| 作者单位： | 昆明理工大学机电工程学院,云南昆明650093 |
| |
| 基金项目： | 昆明理工大学2010年创新基金资助项目（2010YB034） |
| |
| 摘 要： | 针对现有主流CAD/CAM系统中尚无DMU125FD类型机床的专用后置处理,而又是实际生产中迫切需要解决的问题,提出了基于坐标转换模型的旋转轴参数设定方法,同时利用LinkPost技术来创建车铣复合这一类型的后置处理。最后利用一个实例来验证该后置处理的正确性。
|
| 关 键 词： | 后置处理 LinkPost 车铣复合 |
Development of the Post Processing for DMU125FD Turning and Milling Machine Tool Based on UG6.0 |
| |
| JIANG Si-bao,ZHANG Yu,LIU Shuang.Development of the Post Processing for DMU125FD Turning and Milling Machine Tool Based on UG6.0[J].Machine Design and Manufacturing Engineering,2011(5):37-40,45. |
| |
| Authors: | JIANG Si-bao ZHANG Yu LIU Shuang |
| |
| Affiliation: | (Kunming University of Science and Technology,Yunnan Kunming,650093,China) |
| |
| Abstract: | In order to realize the DMU125FD machine tool appropriation post processing in CAD/CAM system,it proposes the method for coordinate transformation model based on the axis of the parameters set.Based on the technology of Link Post,it designs a turning and milling machine tool post processing,and shows an example to verify the correctness of the post processing.There is a reference for the special post processing development. |
| |
| Keywords: | Post Processing Link Post Turing and Milling |
| 本文献已被 维普 等数据库收录！ |
