| 滚切式双边剪剪切质量分析 |
| |
| 引用本文： | 曹开宸,皮开鉴,王鑫,刘树.滚切式双边剪剪切质量分析[J].轧钢,2004,21(5):61-62. |
| |
| 作者姓名： | 曹开宸 皮开鉴 王鑫 刘树 |
| |
| 作者单位： | 重庆钢铁股份有限公司中板厂,重庆,400082 |
| |
| 摘 要： | 分析了4种中厚板切边过程中切口缺陷的形状及其形成原因,得出防止钢板在被夹送时跑偏即可避免剪切缺陷并采取了相应对策,实施后提高了钢板成材率。
|
| 关 键 词： | 中厚板 滚切式双边剪 剪切质量 |
| 文章编号： | 1003-9996(2004)05-0061-02 |
| 修稿时间： | 2004年3月9日 |
Analysis of shearing quality of rolling-cut double side shear |
| |
| CAO Kai-chen,PI Kai-jian,WANG Xian,LIU Shu.Analysis of shearing quality of rolling-cut double side shear[J].Steel Rolling,2004,21(5):61-62. |
| |
| Authors: | CAO Kai-chen PI Kai-jian WANG Xian LIU Shu |
| |
| Abstract: | Four kinds of defects of cutting side of plate were introduced and their causes were analyzed.The key measure to eliminate cutting defects is avoid of running-off of plate. |
| |
| Keywords: | plate rolling-cut double side shear shearing quality |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
