| 9Cr18Mo钢圆柱试件淬火过程的数值模拟 |
| |
| 引用本文： | 郭林林,王清,孙东立,武高辉,刘学侃,王宏计,唐雪明. 9Cr18Mo钢圆柱试件淬火过程的数值模拟[J]. 哈尔滨工业大学学报, 2010, 42(5): 759-762 |
| |
| 作者姓名： | 郭林林 王清 孙东立 武高辉 刘学侃 王宏计 唐雪明 |
| |
| 作者单位： | 哈尔滨工业大学材料科学与工程学院;哈尔滨工业大学材料科学与工程学院;哈尔滨工业大学材料科学与工程学院;哈尔滨工业大学材料科学与工程学院;西安飞行自动控制研究所;西安飞行自动控制研究所;西安飞行自动控制研究所 |
| |
| 基金项目： | 航空基金资助项目(2007ZE18) |
| |
| 摘 要： | 采用有限元分析方法,利用ANSYS软件模拟9Cr18Mo钢圆柱形试样淬火冷却过程,得到淬火冷却曲线、残余应力随淬火时间变化曲线、残余应力沿圆柱体轴向分布曲线和试样最终轴向伸长量.分析结果表明,在热应力和组织应力的共同作用下淬火过程中试样应力状态变化复杂,最终的应力状态以组织应力为主.试样表面残余应力和试样轴向伸长的计算结果与测量结果符合的很好.
|
| 关 键 词： | 9Cr18Mo钢 淬火 数值模拟 有限元 |
Numerical simulation on quenching process of a cylindrical specimen of 9Cr18Mo steel |
| |
| GUO Lin-lin,WANG Qing,SUN Dong-li,WU Gao-hui,LIU Xue-kan,WANG Hong-ji and TANG Xue-ming. Numerical simulation on quenching process of a cylindrical specimen of 9Cr18Mo steel[J]. Journal of Harbin Institute of Technology, 2010, 42(5): 759-762 |
| |
| Authors: | GUO Lin-lin WANG Qing SUN Dong-li WU Gao-hui LIU Xue-kan WANG Hong-ji TANG Xue-ming |
| |
| Affiliation: | School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001,China;School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001,China;School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001,China;School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001,China;Xian Institute of Flight Automatic Controlling,Xian 710065,China);Xian Institute of Flight Automatic Controlling,Xian 710065,China);Xian Institute of Flight Automatic Controlling,Xian 710065,China) |
| |
| Abstract: | The finite element analysis method was applied to the simulation of quenching process of a cylindrical specimen of 9Cr18Mo steel.The cooling curve of quenching process,the variation curve of residual stress with the time,the distribution of residual stress along the axial dimension and the axial deformation of the specimen were obtained.It is found that the stress state in the specimen during quenching is complicated due to the thermal stress and the structure stress.In the end of the process,the stress state mainly relies on the structure stress.The calculated results of residual stress on the surface and the axial deformation of the specimen agree well with experimental results. |
| |
| Keywords: | 9Cr18Mo steel quenching numerical simulation finite element |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《哈尔滨工业大学学报》浏览原始摘要信息 |
|
点击此处可从《哈尔滨工业大学学报》下载全文 |
|
