炼铁除尘灰全铁分析方法的改进

以炼铁除尘灰为试样，采用过氧化钠熔融法分析全铁，在过氧化钠加入量2.0 g、熔融温度650℃、熔融时间10 min的条件下，碳去除率98.65%，消除了碳对还原、滴定终点颜色的影响。人工样品分析结果表明，本方法适用于全铁含量＜48%、碳含量＜54%的炼铁除尘灰中全铁的测定，分析结果与国标法、行标法和预氧化法测定值相比，无显著性差异。

Improvement of A nalysis M ethod of the T otal Iron in Ironmaking D usting A sh

Taking ironmaking dusting ash as samples, the total iron in it was analyzed by sodium peroxide melting method. In the conditions of sodium peroxide dosage 2 g, melting temperature of 650℃and melting time of 10 min, the carbon removal rate reached 98.65%, eliminating the influences of the carbon on the colour of reduction end-point and titration end-point. The analytical results of the artificial samples showed that this method is applicable to the total iron content determination of the ironmaking dusting ash with less than 48% TFe and less than 54% C. Comparing with the National Standard Method, the Industry Standard Method and pre-oxidation method, the results by this method have no significant differences.