首页 | 本学科首页   官方微博 | 高级检索  
     

热处理工艺对La掺杂纳米TiO2光催化性能的影响
引用本文:胡相红,陈勇,谷科成,陈逸,袁馨. 热处理工艺对La掺杂纳米TiO2光催化性能的影响[J]. 材料开发与应用, 2010, 25(4): 21-23
作者姓名:胡相红  陈勇  谷科成  陈逸  袁馨
作者单位:武警北京指挥学院,实验中心,北京,100012;后勤工程学院,营房管理与环境工程系,重庆,401311
基金项目:重庆市自然科学基金项目 
摘    要:以钛酸四丁酯和硝酸镧为原料,采用溶胶-凝胶法制备了La掺杂摩尔分数为2%的纳米TiO2,以TNT为目标降解物,研究了热处理方式对TiO2光催化性能的影响。结果表明:样品光催化性能最佳的热处理温度为500℃,升温速率为10℃/min,活化时间为2h,60min内对TNT的去除率达到了96%。

关 键 词:热处理  La-TiO2  光催化性能

Influence of Thermal Treatment Processing on the Photocatalytic Activity of Lanthanum Doped Titanium Dioxide
HU Xiang-hong,CHEN Yong,GU Ke-cheng,CHEN Yi,YUAN Xin. Influence of Thermal Treatment Processing on the Photocatalytic Activity of Lanthanum Doped Titanium Dioxide[J]. Development and Application of Materials, 2010, 25(4): 21-23
Authors:HU Xiang-hong  CHEN Yong  GU Ke-cheng  CHEN Yi  YUAN Xin
Affiliation:HU Xiang-hong1,CHEN Yong2,GU Ke-cheng2,CHEN Yi2,YUAN Xin2 (1.Experiment Center,Comm, College of Armed Police Force,Beijing 100012,China,2.Dept.of Barracks' Management& Environmental Engineering,LEU,Chongqing 401311,China)
Abstract:The nanometer TiO2 powders doped with La3+ in a molar fraction of 2% was prepared from Ti(OC4H9)4 and La(NO3)3 by sol-gel processing.The influence of thermal treatment processing on the photocatalytic activity of TiO2 was investigated through degradation of TNT.The results showed that the fitting thermal treatment temperature of sample is 500℃,the temperature rising rate is 10℃/ min and the activation time is 2 h,the degradation of TNT is 96% within 60 minutes.
Keywords:La-TiO2
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号