首页 | 本学科首页   官方微博 | 高级检索  
     

采用HF酸浸蚀沉降的方法从单晶硅切割废浆料中回收硅粉
引用本文:李佳艳,王浩洋,谭毅,董伟.采用HF酸浸蚀沉降的方法从单晶硅切割废浆料中回收硅粉[J].功能材料,2012,43(11):1479-1481,1485.
作者姓名:李佳艳  王浩洋  谭毅  董伟
作者单位:辽宁省太阳能光伏系统重点实验室,辽宁大连116024/大连理工大学材料学院,辽宁大连116024
基金项目:国家自然科学基金青年科学基金资助项目,新青年基金资助项目
摘    要:采用HF酸浸蚀沉降的方法回收单晶硅切割废浆料中的硅粉。系统地研究了在回收硅粉过程中,HF酸的浓度,HF酸处理的时间,以及在HF酸浸蚀沉降处理前的超声震荡时间等实验条件对回收率和纯度等性能的影响因素。研究表明,在HF酸浓度为2%,HF酸处理时间24h,超声震荡时间60min的条件下,回收得到的粉体中硅的纯度可以达到82%(质量分数),且回收率可以达到62%的水平。通过此方法可以实现从切割废浆料中回收硅粉。

关 键 词:切割废浆料  HF酸  浸蚀  硅回收

Recycling of silicon powder from cutting slurry waste using HF etching sedimentation method
LI Jia-yan,WANG Hao-yang,TAN Yi,DONG Wei.Recycling of silicon powder from cutting slurry waste using HF etching sedimentation method[J].Journal of Functional Materials,2012,43(11):1479-1481,1485.
Authors:LI Jia-yan  WANG Hao-yang  TAN Yi  DONG Wei
Affiliation:1,2(1.Key Laboratory for Solar Energy Photovoltaic System of Liaoning Province,Dalian 116024,China;2.School of Materials Science and Engineering,Dalian University of Technology,Dalian 116024,China)
Abstract:HF acid etching sedimentation process was designed to recycling of silicon from cutting slurry waste in poly-silicon slicing process.The effects of several operational variables on the recovery rate and yield of silicon kerfs were systematically investigated,including HF acid concentration,HF processing time.Also the effects of dispersion time of ultrasonic agitation prior to the HF acid etching sedimentation process were also studied.In considering the acceptable levels of both recovery rate and yield,a product with Si recovery rate of 82wt% and the yield 62% is obtained under the operating conditions by setting HF acid concentration at 2%,HF processing time at 24h,the agitation time at 60min.It is indicated that through this method we can recycle the Si powder from slurry waste.
Keywords:slicing slurry  hydrofluoric acid  etching  recycling of Si
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号