| 航空液压管接头综述 |
| |
| 引用本文： | 欧阳小平,方旭,朱莹,王锴,杨华勇.航空液压管接头综述[J].中国机械工程,2015,26(16):2262-2271. |
| |
| 作者姓名： | 欧阳小平 方旭 朱莹 王锴 杨华勇 |
| |
| 作者单位： | 1.浙江大学流体动力与机电系统国家重点实验室,杭州,310027
2.航空机电系统综合航空科技重点实验室,南京,211100
3.中航工业机电系统股份有限公司,北京,100164 |
| |
| 基金项目： | 国家自然科学基金资助项目（51275450）；国家重点基础研究发展计划（973计划）资助项目（2014CB046403);浙江大学基本科研业务费专项基金资助项目（2013FZA4004) |
| |
| 摘 要： | 航空液压管接头是直接影响飞机安全和可靠性的重要元件。为全面了解各类航空液压管接头性能，介绍了永久式、可分离式和柱端式三大类航空液压管接头的基本特点；从结构、原理、使用范围、设计标准和供应商等方面对主要液压管接头进行了详细阐述；
从耐压能力、拉脱强度、质量和安装等方面对比分析了三大类管接头中每种管接头的性能和优缺点；针对不同压力级别系统给出了航空液压管接头的选择推荐，展望了航空液压管接头未来的发展方向，指出了我国在该领域与国际先进水平的差距。
|
| 关 键 词： | 航空 液压管接头 永久式 可分离式 柱端式 |
Overview of Aviation Hydraulic Fittings |
| |
| Ouyang Xiaoping,Fang Xu,Zhu Ying,Wang Kai,Yang Huayong.Overview of Aviation Hydraulic Fittings[J].China Mechanical Engineering,2015,26(16):2262-2271. |
| |
| Authors: | Ouyang Xiaoping Fang Xu Zhu Ying Wang Kai Yang Huayong |
| |
| Affiliation: | 1.State Key Laboratory of Fluid Power Transmission and Control,Zhejiang University,Hangzhou,310027
2.Aviation Key Laboratory of Science and Technology on Aero Electromechanical System Integration,Nanjing,211100
3.China Aviation Industry Electromechanical Systems Corporation,Beijing,100164 |
| |
| Abstract: | The aviation hydraulic fitting is one of the most important components which directly affects the safety and reliability of aircrafts.A comprehensive overview was intended to introduce the general features of the aviation hydraulic fittings.The performance of three main types of aviation hydraulic fittings was demonstrated, including permanent fittings,separable fittings and boss fittings.The structure, principles,applications,design standards and suppliers of each type were illustrated.The characteristics of each main type fitting such as pressure resistance,pull-off strength,weight and installation,were analyzed and compared.The recommended selections of aviation hydraulic fittings for different pressure levels were summarized.Finally,the developing prospect of aviation hydraulic fittings was given, and the large distance in the aviation hydraulic fittings between China and the international advanced level was pointed out. |
| |
| Keywords: | aviation hydraulic fitting permanent separable boss |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《中国机械工程》浏览原始摘要信息 |
|
点击此处可从《中国机械工程》下载全文 |
|
