Electrochemical oxidation of adsorbed alkenoic acids as a function of chain length at Pt(111) electrodes. Studies by cyclic voltammetry,EELS and Auger spectroscopy

Studies of the electrochemical oxidation of a series of straight-chain terminal alkenoic acids adsorbed at a Pt(111) electrode surface are reported. Compounds adsorbed were: propenoic acid (acrylic acid, PPA); 3-butenoic acid (vinylacetic acid, 3BTA); 4-pentenoic acid (allylacetic acid, 4PTA); 6-heptenoic acid (6HPA); and 10-undecenoic acid (10UDA). Vibrational spectra of adsorbed layers were obtained by use of electron energy-loss spectroscopy (EELS). Molecular packing densities were measured by use of Auger spectroscopy. Electrochemical oxidation of each adsorbed layer was explored by means of cyclic voltammetry in aqueous inert electrolyte (KF/HF). As the analogous aliphatic acids are not chemisorbed at Pt under the same conditions, the alkenoic acids evidently adsorb at Pt(111) predominantly through the C=C double bond. Molecular packing densities indicate that the carboxylic acid moiety is in contact with the Pt surface only in the case of PPA. EELS spectra also indicate that the carboxylate groups (other than in PPA) are present as pendants. The carboxylic acid O-H stretching bands of most of the adsorbed acids are red-shifted and broadened, evidently due to extensive intermolecular hydrogen bonding; the exceptions are PPA, for which the interaction is primarily with the Pt surface, and 3BTA, for which intermolecular interaction between the carboxylic acid pendants is apparently prevented by steric considerations. The surface-attached carboxylic acid moieties react with KOH solution, leading to retention of K⁺ ions, detected by Auger spectroscopy, and to changes in the vibrational spectra indicative of carboxylate anions; reactivity toward KOH decreases with chain length. Adsorbed alkenoic acids at Pt(111) surfaces are stable in water and in vacuum. Oxidation of the adsorbed short-chain acids PPA and 3BTA proceeds to completion, forming CO₂ as the principal product. Oxidation of the adsorbed long-chain acids converts the C=C moiety to 2CO₂, and transforms the remainder of the molecule to an unadsorbed diacid (likely possibilities are malonic acid from 4PTA; glutaric acid from 6HPA; and heptane-1,7-dioic acid from 10UDA).