| 基于过程控制的设计更改控制系统研究 |
| |
| 引用本文： | 李成,高建民,李青.基于过程控制的设计更改控制系统研究[J].计算机集成制造系统,2006,12(10):1549-1555. |
| |
| 作者姓名： | 李成 高建民 李青 |
| |
| 作者单位： | 1. 西安交通大学,机械制造系统工程国家重点实验室,陕西,西安,710049;西安交通大学,机械工程学院CIM研究所,陕西,西安,710049
2. 北京航空航天大学,机械工程学院,北京,100083 |
| |
| 基金项目： | 国防科工委基础科研项目 |
| |
| 摘 要： | 针对航空制造企业的特点，利用工作流技术，提出了一种基于过程控制的设计更改控制系统的体系结构，采用面向对象的Rational统一过程方法对业务过程进行分解和离散化，从中抽取基于业务角色的、粒度合适的过程元模型，将其开发成符合工作流管理联盟接口规范的软件组件，并以此构建相应的工作流模型。用该体系结构所开发的飞机制造设计更改控制系统，实现了信息集成、过程集成、过程控制、过程分析和系统柔性。
|
| 关 键 词： | 设计更改控制 技术状态管理 过程控制 工作流管理 |
| 文章编号： | 1006-5911(2006)10-1549-07 |
| 修稿时间： | 2005年7月20日 |
Design change control system based on process control |
| |
| LI Cheng,GAO Jian-min,LI Qing.Design change control system based on process control[J].Computer Integrated Manufacturing Systems,2006,12(10):1549-1555. |
| |
| Authors: | LI Cheng GAO Jian-min LI Qing |
| |
| Abstract: | Aimed at the characteristics of aeronautic manufacturing enterprises,an architecture of design change control system driven by workflow was presented.Rational Unified Process(RUP),an object-oriented analysis method was used to disassemble and disperse the business process.And process meta-model was extracted,which was based on business role with well-suited granularity.Then it was developed into component which was conform to the interface criterion of workflow management federation and corresponding workflow model was also built up.The design change control system of aeroplane manufacturing based on this architecture has realized information integration,process integration,process control,process analysis,and system flexibility. |
| |
| Keywords: | design change control configuration management process control workflow management |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
