| 基于正交切削的有限元仿真建模技术 |
| |
| 引用本文： | 陈文琳,李伟,刘宁.基于正交切削的有限元仿真建模技术[J].工具技术,2007,41(6):51-54. |
| |
| 作者姓名： | 陈文琳 李伟 刘宁 |
| |
| 作者单位： | 1. 合肥工业大学材料科学与工程学院,230009,合肥市
2. 合肥工业大学,230009,合肥市 |
| |
| 摘 要： | 利用Deform2D有限元分析软件建立了金属正交切削过程的仿真模型。通过正交切削试验,对仿真结果进行了验证和比较,并分析了摩擦系数对仿真结果中切屑形状、切削力等的影响。
|
| 关 键 词： | 有限元法 仿真 正交切削 建模 摩擦系数 Deform2D |
| 修稿时间： | 2006年9月1日 |
Study on Orthogonal-cutting-based FEM Simulation Modeling Technology |
| |
| Chen Wenlin,Li Wei,Liu Ning.Study on Orthogonal-cutting-based FEM Simulation Modeling Technology[J].Tool Engineering(The Magazine for Cutting & Measuring Engineering),2007,41(6):51-54. |
| |
| Authors: | Chen Wenlin Li Wei Liu Ning |
| |
| Abstract: | The simulation model of metal orthogonal cutting process was established by means of finite element software Deform2D.Through an orthogonal cutting experiment,the simulation results were validated and compared with experimental results,and the impacts of friction factor on simulation results such as chip figure,cutting force,etc were analyzed. |
| |
| Keywords: | FEM simulation orthogonal cutting modeling friction factor Deform2D |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
