| 电器动触头零件冷挤压工艺及模具 |
| |
| 引用本文： | 金仁钢,金会栋.电器动触头零件冷挤压工艺及模具[J].模具工业,2001(4):35-37. |
| |
| 作者姓名： | 金仁钢 金会栋 |
| |
| 作者单位： | 1. 湘火炬汽车配件股份有限公司
2. 株洲工学院 |
| |
| 摘 要： | 分析了电器动触头零件冷挤压成形工艺方案 ,提出了典型零件工艺参数和模具结构设计 ,保证了冷挤压件质量
|
| 关 键 词： | 动触头 冷挤压 工艺参数 模具结构 |
| 修稿时间： | 2000年10月9日 |
The Cold Extruding Process and the Tooling for the Moving Contacts |
| |
| Jin Rengang et al.The Cold Extruding Process and the Tooling for the Moving Contacts[J].Die & Mould Industry,2001(4):35-37. |
| |
| Authors: | Jin Rengang |
| |
| Affiliation: | Jin Rengang et al |
| |
| Abstract: | The cold extruding process for the moving contacts of the electrical equipment was analyzed. The technological data for the typical parts were presented and the design of the tooling structure was put forward. The quality of the cold extruded parts is ensured. |
| |
| Keywords: | moving contact cold extrusion technological data tooling structure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
