| 工艺参数对大口径薄壁矩形管弯曲成形的影响 |
| |
| 引用本文： | 刘红,郭超,蒋兰芳,曹翔,贾平平,陈先立,胡昌国,沈开勇.工艺参数对大口径薄壁矩形管弯曲成形的影响[J].模具工业,2013(9):23-26. |
| |
| 作者姓名： | 刘红 郭超 蒋兰芳 曹翔 贾平平 陈先立 胡昌国 沈开勇 |
| |
| 作者单位： | 浙江工业大学机械工程学院,浙江杭州310014 |
| |
| 摘 要： | 基于动态显示分析有限元平台Abaqus/explicit,建立了大口径薄壁矩形管弯曲成形的三维有限元模型,模拟分析了变形速度对矩形管弯曲成形失稳起皱的影响规律,试验结果表明:在单独施加旋转速度时薄壁矩形管的失稳起皱程度较大,同步施加旋转速度和助推速度时管件的失稳起皱趋势有所减缓,起皱系数ζ也随着减小。研究结果对薄壁矩形截面管材弯曲成形中工艺参数的选择和优化具有重要意义。
|
| 关 键 词： | 大口径薄壁矩形管 弯曲成形 失稳起皱 变形速度 |
Study on effect of bending forming process parameters on large diameter thin-walled rectangular pipe |
| |
| LIU Hong,GUO Chao,JIANG Lan-fang,CAO Xiang,JIA ping-ping,CHEN Xian-li,HU Chang-guo,SHEN Kai-yong.Study on effect of bending forming process parameters on large diameter thin-walled rectangular pipe[J].Die & Mould Industry,2013(9):23-26. |
| |
| Authors: | LIU Hong GUO Chao JIANG Lan-fang CAO Xiang JIA ping-ping CHEN Xian-li HU Chang-guo SHEN Kai-yong |
| |
| Affiliation: | (College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou, Zhejiang 310014, China) |
| |
| Abstract: | Based on the dynamic explicit analysis of finite element platform Abaqus/Explicit, A 3D forming finite element model of the large diameter thin-walled rectangular was built. The influence of the bending deformation rate of the rectangular pipe on wrinkling was ana- lyzed. The experimental results showed that the degree of wrinkling of the thin-walled pipe become great by applying a rotational speed alone and imposing rotational speed and boost speed at the same time can help the wrinkling trend slowing, and the wrinkling fac- tor decreases. |
| |
| Keywords: | large diameter thin-walled rectangular tube bending forming wrinkling deforma-tion rate |
| 本文献已被 维普 等数据库收录！ |
|
