首页 | 本学科首页   官方微博 | 高级检索  
     

爆炸冲击载荷对复合板低温冲击性能的影响
引用本文:赵惠,李平仓,何晓松,周颖刚,邓启平. 爆炸冲击载荷对复合板低温冲击性能的影响[J]. 塑性工程学报, 2011, 18(1). DOI: 10.3969/j.issn.1007-2012.2011.01.010
作者姓名:赵惠  李平仓  何晓松  周颖刚  邓启平
作者单位:1. 西安天力金属复合材料有限公司,西安,710201
2. 陕西省层状金属复合材料工程研究中心,西安,710201
基金项目:国家支撑计划资助项目(2007BAE07B02)
摘    要:采用爆炸焊接的方法制备复合板后,复合板的低温冲击性能发生剧烈的下降,文章针对这一现象,采用金相检验、扫描电镜分析和透射电镜分析法,对爆炸复合前后复合板的微观组织进行对比。结果表明,爆炸焊接后,复合板晶粒内部产生了大量的位错团,使材料晶粒内部位错密度升高,从而导致材料的低温冲击性能下降。为改善复合板冲击性能,采用热处理方式,使复合板晶粒内部的位错密度大大下降,复合板低温冲击性能得到明显改善。

关 键 词:爆炸载荷  复合板  低温冲击性能

Effects of Explosive Load on the impact properties of the clad plates under low temperature
ZHAO Hui,LI Ping-cang,HE Xiao-song,ZHOU Ying-gang,DENG Qi-ping. Effects of Explosive Load on the impact properties of the clad plates under low temperature[J]. Journal of Plasticity Engineering, 2011, 18(1). DOI: 10.3969/j.issn.1007-2012.2011.01.010
Authors:ZHAO Hui  LI Ping-cang  HE Xiao-song  ZHOU Ying-gang  DENG Qi-ping
Affiliation:ZHAO Hui LI Ping-cang HE Xiao-song(Xi'an Tianli Clad Metal materials CO.LTD,Xi'an 710201 China)ZHOU Ying-gang DENG Qi-ping(Shanxi Engineering Research Center of Metal Clad Plate,Xi'an 710201 China)
Abstract:The impact property of the clad plate decreased obviously after prepared by explosive welding.The microstructure of the material before and after explosive welding were investigated employing optical microscope(OM),scanning electron microscope(SEM) and transmission electron microscope(TEM).The results indicate that mass of dislocation in large quantities emerge in the grain of the material after explosive welding,so increases and the impact property of material decreases distinctly.Employing suitable heat t...
Keywords:explosive welding load  clad plate  impact property at low temperature  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号