| 隔离材料对钛-钢复合板表面质量及结合强度的影响 |
| |
| 引用本文： | 王敬忠,颜学柏,闫静亚,容耀,严平,刘勇. 隔离材料对钛-钢复合板表面质量及结合强度的影响[J]. 金属热处理, 2009, 34(2) |
| |
| 作者姓名： | 王敬忠 颜学柏 闫静亚 容耀 严平 刘勇 |
| |
| 作者单位： | 1. 西安建筑科技大学,冶金工程学院,陕西,西安,710055
2. 宝鸡钛业股份有限公司,陕西,宝鸡,721014 |
| |
| 基金项目： | 西安建筑科技大学学科建设资助项目，西安建筑科技大学校青年基金 |
| |
| 摘 要： | 研究了不同隔离材料对钛-钢复合板表面质量及结合强度的影响.试验结果表明,同种隔离材料在不同加工温度下,随加工温度升高表面质量变差;不同种隔离材料对复合板的表面质量及结合强度有一定影响;以MoS2或者退火态钛自身的氧化膜作为隔离材料,复层的表面质量和结合强度能够满足质量要求.
|
| 关 键 词： | 钛-钢复合板 隔离材料 表面质量 结合强度 金属流动 |
Effect of segregating materials on surface quality and bonding strength of Ti-steel clad plate |
| |
| WANG Jing-zhong,YAN Xue-bai,YAN Jing-ya,RONG Yao,YAN Ping,LIU Yong. Effect of segregating materials on surface quality and bonding strength of Ti-steel clad plate[J]. Heat Treatment of Metals, 2009, 34(2) |
| |
| Authors: | WANG Jing-zhong YAN Xue-bai YAN Jing-ya RONG Yao YAN Ping LIU Yong |
| |
| Affiliation: | 1.School of Metallurgical Engineering;Xi'an University of Architecture and Technology;Xi'an Shaanxi 710055;China;2.Baoji Titanium Industry Co.;Ltd.;Baoji Shaanxi 721014;China |
| |
| Abstract: | The effect of segregating materials on the surface quality and bonding strength of Ti-steel clad plate was investigated.The results show that as the same segregating material,the quality of clad plate surface becomes worse with increasing the processing temperature.There is some certain effect of different segregating material on the bonding strength of the clad plate.Using the MoS2 or the Ti oxide film on the surface of annealed titanium itself as the segregating material,the surface quality and bonding st... |
| |
| Keywords: | Ti-steel clad plate segregating materials surface quality bonding strength metal flow |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
