| 基于SolidWorks的双驴头抽油机支架三维建模及结构优化 |
| |
| 引用本文： | 崔晓华,梁柱,邹龙庆,于红艳.基于SolidWorks的双驴头抽油机支架三维建模及结构优化[J].石油矿场机械,2011,40(1):42-44. |
| |
| 作者姓名： | 崔晓华 梁柱 邹龙庆 于红艳 |
| |
| 作者单位： | 1. 东北石油大学,黑龙江,大庆,163318
2. 大庆油田装备制造研究院,黑龙江,大庆,163300 |
| |
| 基金项目： | 黑龙江省科技厅科技攻关项目(GZ08A507) |
| |
| 摘 要： | 依据某型双驴头抽油机支架结构,运用SolidWorks软件进行三维建模,并进行有限元分析;根据分析结果进行结构优化,实现降低成本、提高可靠性的目标。
|
| 关 键 词： | SolidWorks 抽油机支架 结构优化 |
Three-dimensional Modeling and Structural Optimization of Double Horse Head Pumping Unit Stent based on SolidWorks |
| |
| CUI Xiao-hua,LIANG Zhu,ZOU Long-qing,YU Hong-yan.Three-dimensional Modeling and Structural Optimization of Double Horse Head Pumping Unit Stent based on SolidWorks[J].Oil Field Equipment,2011,40(1):42-44. |
| |
| Authors: | CUI Xiao-hua LIANG Zhu ZOU Long-qing YU Hong-yan |
| |
| Affiliation: | CUI Xiao-hua1,LIANG Zhu1,ZOU Long-qing1,YU Hong-yan2(1.Northeast Petroleum University,Daqing 163318,China,2.Daqing Oilfield EquipmentManufacture Research Institute,Daqing 163300,China) |
| |
| Abstract: | The 3d model was created according to the actual structure of double horse head pumping unit stent by SolidWorks.Then the finite element analysis was carried on.the structure based on the analysis result was optimized and ultimately up to cost reduction and reliability improved. |
| |
| Keywords: | SolidWorks pumping unit stent structure optimization |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
