| 加氢裂化热高分油管线弯头开裂分析 |
| |
| 引用本文： | 吕碧超,谈平庆.加氢裂化热高分油管线弯头开裂分析[J].石油化工腐蚀与防护,2002,19(1):38-41. |
| |
| 作者姓名： | 吕碧超 谈平庆 |
| |
| 作者单位： | 镇海炼化公司炼油厂,浙江,宁波,315207 |
| |
| 摘 要： | 对国产加氢裂化热高分油管线的弯头开裂原因进行了分析 ,对预防连多硫酸腐蚀提出了相应的防范措施 :选用碳含量 <0 .0 3 %并含有稳定化元素Ti、Nb的奥氏体不锈钢或双相钢 ;控制焊缝硬度不大于HB2 0 0并焊后热处理 ;12CrMo和 15CrMo耐应力腐蚀性能好 ;设备停运后马上进行清洗并用碱液中和
|
| 关 键 词： | 奥氏体不锈钢 连多硫酸 腐蚀 |
| 修稿时间： | 2001年7月16日 |
Analysis of the Elbow Cracking on High - temperature Separation Pipeline of Hydrocracker |
| |
| Lu Bichao,Tan Pingqing.Analysis of the Elbow Cracking on High - temperature Separation Pipeline of Hydrocracker[J].Petrochemical Corrosion and Protection,2002,19(1):38-41. |
| |
| Authors: | Lu Bichao Tan Pingqing |
| |
| Abstract: | The cracking of the elbow on the high-temperature separation pipeline of the domestic hydrocracker was analyzed. The corresponding protection measures against polythionic acid corrosion were presented: ie selection of austenic steel or duplex steel with carbon less than 0.03% and stablizing elements like Ti and Nb and the hardness of the welds controlled at no greater than HB200 and implementation of heat treatment. 12CrMo and 15CrMo had good performance against stress corrosion. The equipment should be cleaned and neutralized by caustics immediately after shutdown. |
| |
| Keywords: | austenic stainless steel polythionic acid corrosion |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
