首页 | 本学科首页   官方微博 | 高级检索  
     

100 t顶吹转炉单渣脱磷工艺的研究
引用本文:曹东,万雪峰,李德刚,廖相巍,赵刚,贾吉祥. 100 t顶吹转炉单渣脱磷工艺的研究[J]. 鞍钢技术, 2010, 0(6): 15-19. DOI: 10.3969/j.issn.1006-4613.2010.06.003
作者姓名:曹东  万雪峰  李德刚  廖相巍  赵刚  贾吉祥
作者单位:鞍钢股份有限公司技术中心,辽宁,鞍山,114009;鞍钢股份有限公司技术中心,辽宁,鞍山,114009;鞍钢股份有限公司技术中心,辽宁,鞍山,114009;鞍钢股份有限公司技术中心,辽宁,鞍山,114009;鞍钢股份有限公司技术中心,辽宁,鞍山,114009;鞍钢股份有限公司技术中心,辽宁,鞍山,114009
摘    要:
对100 t转炉冶炼管线钢X70单渣法深脱磷工艺进行了工业性试验研究,确定了冶炼过程需要控制的原料及操作制度等关键参数。得出结论,铁水硅含量为0.3%~0.6%、终点温度≤1700℃、终渣(FeO)含量〈26.45%,且增大渣量的情况下,可以生产出ω[P]平均为0.009 0%的成品。

关 键 词:顶吹转炉  脱磷工艺  单渣法

Study on Dephosphorization Technique with Single Slag Operation in 100 t Top Blown Converter
Cao Dong,Wan Xuefeng,Li Degang,Liao Xiangwei,Zhao Gang,Jia Jixiang. Study on Dephosphorization Technique with Single Slag Operation in 100 t Top Blown Converter[J]. Aisc Techniques, 2010, 0(6): 15-19. DOI: 10.3969/j.issn.1006-4613.2010.06.003
Authors:Cao Dong  Wan Xuefeng  Li Degang  Liao Xiangwei  Zhao Gang  Jia Jixiang
Affiliation:Cao Dong,Wan Xuefeng,Li Degang,Liao Xiangwei,Zhao Gang,Jia Jixiang(Technology Center of Angang Steel Co.,Ltd.,Anshan 114009,Liaoning,China)
Abstract:
Based on the industrial test study of deep dephosphorization technique for making X70 pipeline steel with single slag operation in the 100 t top blown converter,some key parameters of the raw materials and operating duty are established during the blowing process.It is concluded that finished products with average content of 0.009 0% P can be produced when silicon content in hot metal is controlled in the range of 0.3%~0.6%,the blowing end point temperature is less than 1 700 ℃,the FeO content in the final slag is controlled lower than 26.45% even if the amount of slag is increased.
Keywords:top blown converter  dephosphorization technique  single slag process  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号