| 基于模态试验的螺栓联接刚度识别与应用 |
| |
| 引用本文： | 桂林,刘彩章,徐妍妍,蔡涛.基于模态试验的螺栓联接刚度识别与应用[J].机床与液压,2017,45(2):12-14. |
| |
| 作者姓名： | 桂林 刘彩章 徐妍妍 蔡涛 |
| |
| 作者单位： | 武汉重型机床集团有限公司,湖北武汉,430205 |
| |
| 基金项目： | 湖北省重大科技创新计划资助项目 |
| |
| 摘 要： | 使用模态测试和有限元优化相结合的方法获取了螺栓联接的等效刚度。对处于安装状态的光栅尺支架进行模态测试,获取前两阶模态参数;基于该模态参数,通过有限元优化获取螺栓联接的等效刚度;将该等效刚度应用到光栅尺支架的结构拓扑优化中,通过对比固定螺栓孔的拓扑优化结果,证明了获取螺栓联接等效刚度的必要性。
|
| 关 键 词： | 模态试验 螺栓联接刚度 刚度识别 |
| 收稿时间： | 2015/12/14 0:00:00 |
Identification and Application of the Stiffness of Bolted Joint Based on Modal Test |
| |
| GUI Lin,LIU Caizhang,XU Yanyan,CAI Tao.Identification and Application of the Stiffness of Bolted Joint Based on Modal Test[J].Machine Tool & Hydraulics,2017,45(2):12-14. |
| |
| Authors: | GUI Lin LIU Caizhang XU Yanyan CAI Tao |
| |
| Abstract: | To obtain the first two order modal parameters of the support of grating ruler which was bolted to the tool head , a modal test was carried out by LMS Test Lab .Then the stiffness of springs in the FE model of support was obtained by optimization .Topology optimization was accomplished with the stiffness obtained set to the model , and this result was difference from the result with fix bound-ary conditions.It’s necessary to obtain the equivalent stiffness of bolted joint . |
| |
| Keywords: | Modal test Stiffness of bolted joint Stiffness identification |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《机床与液压》浏览原始摘要信息 |
|
点击此处可从《机床与液压》下载全文 |
|
