| 有机硅绝热涂料的研制 |
| |
| 引用本文： | 邹德荣.有机硅绝热涂料的研制[J].有机硅材料,2004,18(2):11-13. |
| |
| 作者姓名： | 邹德荣 |
| |
| 作者单位： | 航天科工集团江河化工厂,湖北远安,444200 |
| |
| 摘 要： | 用RTV585硅橡胶、填料及固化剂60R制成了绝热涂料；考察了填料种类及用量对绝热涂料绝热性能、力学性能和粘接性能的影响及金属表面处理方式对金属与涂料的粘接性能的影响。结果表明，当RTV585用量为100g、固化剂60R用量为2g、软木粉用量为20g时，可制得绝热性能良好的涂料；采用喷砂 清洗 偶联剂的表面处理模式，可大大提高涂料与金属的粘接性能。
|
| 关 键 词： | 有机硅 绝热涂料 研制 硅橡胶 填料 固化剂 软木粉 |
| 文章编号： | 1009-4369(2004)02-0011-03 |
| 修稿时间： | 2003年11月8日 |
Development of adiabatic coating based silicone |
| |
| ZOU De-rong.Development of adiabatic coating based silicone[J].Silicone Material,2004,18(2):11-13. |
| |
| Authors: | ZOU De-rong |
| |
| Abstract: | The adiabatic coating based silicone was prepared by RTV 585 silicone rubber,filler and curing agent 60R.The effects of type and amount of filler on the properties of insulation,mechanics and adhesion of adiabatic coating and effect of the treatment method of metal surface on the adhesive strength between metal and coating were discussed.The result showed that the excellent adiabatic coating could be obtained with 100 g RTV585,2 g 60R curing agent and 20 g cork.The adhesive strength between metal and coating could be increased by the treatment method of sandblast clean coupling agent |
| |
| Keywords: | adiabatic coating RTV silicone cork |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
