| 装炉温度对大板坯加热过程热应力的影响 |
| |
| 引用本文： | 朱正海,徐其言,孙前进,常立忠,施晓芳.装炉温度对大板坯加热过程热应力的影响[J].安徽工业大学学报,2014(2):111-116,139. |
| |
| 作者姓名： | 朱正海 徐其言 孙前进 常立忠 施晓芳 |
| |
| 作者单位： | [1]安徽工业大学冶金工程学院,安徽马鞍山243002 [2]马鞍山钢铁股份有限公司第二钢轧总厂,安徽马鞍山243051 |
| |
| 基金项目： | 安徽高校省级自然科学研究重点项目（KJ2012Z037）;国家自然科学基金项目（51304003） |
| |
| 摘 要： | 针对大板坯的加热过程,建立铸坯的热弹塑性模型,研究不同装炉温度条件下铸坯热应力分布的变化规律。研究表明:冷装和400℃装炉的铸坯,表面和心部分别受到压应力和拉应力作用,热应力随加热过程的进行逐渐减小;600,800℃热装铸坯入炉后,表面所受拉应力迅速转变成压应力,峰值最高达37 MPa,心部所受压应力迅速转变为拉应力;出炉之前,热装和冷装铸坯内外的热应力都趋于零。
|
| 关 键 词： | 铸坯 装炉温度 热应力 弹塑性模型 |
A Study of the Effect of Charging Temperature for Thermal Stress of Slab in Heating Process |
| |
| Affiliation: | ZHU Zhenghai, XU Qiyan, SUN Qianjin, CHANG Lizhong, SHI Xiangfang(1. School of Metallurgical Engineering, Anhui University of Technology, Ma＇anshan 243002, China; 2.No.2 Steelmaking and Rolling Gennal Plant, Ma＇anshan.Iron ＆ Steel Co. Ltd., Ma＇anshan 243051, China) |
| |
| Abstract: | As to the heating process of slab, thermal elastoplastic mode of the slab was established, thermal stress distribution of the slab were studied under the condition of different charging temperature. Results show that under the condition of cold charge and 400℃ hot charge, the surface and center of slab are effected by the compressive and tensile stress respectively, and the thermal stress decreases with the temperature increase. Under the condition of 600℃ and 800 ℃ hot charge, the tensile stress on the slab surface is quickly converted to the compressive stress with the peak value of 37 MPa, while the compressive stress in the slab center is promptly converted to the tensile stress. Before discharge, the internal and external thermal stresses of the slab are tending to zero both in hot and cold charge. |
| |
| Keywords: | slab charging temperature thermal stress elastoplastic model |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
