| 左右端盖注射模设计 |
| |
| 引用本文： | 刘星民.左右端盖注射模设计[J].模具制造,2009,9(10):61-64. |
| |
| 作者姓名： | 刘星民 |
| |
| 作者单位： | 河南新飞电器有限公司,河南新乡,453002 |
| |
| 摘 要： | 通过对左右端盖塑件的工艺分析，阐述了侧壁带型孔的典型塑件注射模设计注意事项。此模具结构简单适用，为同类型该零件的模具设计可提供一定的借鉴作用。
|
| 关 键 词： | 注射模 侧壁型孔 抽芯 主分型面 |
Design of Injection Mold for the Left and Right Cover |
| |
| Liu Xingmin.Design of Injection Mold for the Left and Right Cover[J].Die & Mould Manufacture,2009,9(10):61-64. |
| |
| Authors: | Liu Xingmin |
| |
| Abstract: | Through molding process analysis of the left and right cover, elaborated design attentions of injection mold for parts with side hole. The mold structure is simple, it has a certain reference function to similar parts. |
| |
| Keywords: | injecton mold side hole core-pulling main parting surface |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
