首页 | 本学科首页   官方微博 | 高级检索  
     

锂离子电池负极材料钛酸锂的制备与研究
引用本文:吴学庆,薛安,宋浩波,赵伟毅.锂离子电池负极材料钛酸锂的制备与研究[J].陕西化工,2014(1):38-41.
作者姓名:吴学庆  薛安  宋浩波  赵伟毅
作者单位:[1]贵州科学院,贵州贵阳550002 [2]贵州省冶金化工研究所,贵州贵阳550002
基金项目:贵州省科学技术基金资助项目(黔科合J字[2008]2006)
摘    要:以四氯化钛、氢氧化锂为原料,采用模板法,获得前躯体(Li1.81H0.19)Ti2O5·0.262 5TiO2,再通过煅烧,得到纳米钛酸锂(Li4Ti5O12)。最佳制备工艺条件为:模板∶钛(摩尔比)为4∶1,700℃煅烧1 h。采用TEM电镜观测的粒度达到10~100 nm,XRD拟合粒径5~30 nm,比表面积达100~600 m2/g。

关 键 词:钛酸锂  纳米材料  锂电池  负极

Preparation and research of lithium titanate as anode material for lithium-ion battery
WU Xue-qing;XUE An;SONG Hao-bo;ZHAO Wei-yi.Preparation and research of lithium titanate as anode material for lithium-ion battery[J].Applied Chemical Industry,2014(1):38-41.
Authors:WU Xue-qing;XUE An;SONG Hao-bo;ZHAO Wei-yi
Affiliation:WU Xue-qing;XUE An;SONG Hao-bo;ZHAO Wei-yi;Guizhou Academy of Sciences;Guizhou Institute of Metallurgical and Chemical Engineering;
Abstract:The precursor(Li1.81H0.19) Ti2O 5 ·0. 262 5TiO2 were prepared by template method with titanium tetrachloride and lithium hydroxide as raw materials,and then to obtain lithium titanate(Li4Ti5O12) by calcination. The optimum preparation conditions were that when molar ratio was 4∶ 1 of template: Ti, and calcined at 700 ℃ for 1 h. The particle size was 10 ~ 100 nm by TEM,the fitting particle size was 5 ~ 30 nm by XRD,and the specific surface area was 100 ~ 600 m2/g.
Keywords:lithium titanate  nanomaterials  lithium batteries  cathode
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号