| 激光相变硬化对42CrMo钢的组织与性能的影响 |
| |
| 引用本文： | 马德岩,谢江生.激光相变硬化对42CrMo钢的组织与性能的影响[J].西南石油学院学报,1993,15(2):90-94. |
| |
| 作者姓名： | 马德岩 谢江生 |
| |
| 作者单位： | 西南石油学院基础学科部
(马德岩，汤富荣)，西南石油学院石油机械系
(谢江生)，西南石油学院石油机械系(彭胜商) |
| |
| 摘 要： | 本文对低温回火态的42CrMo钢的激光相变硬化进行了实验研究,试验了激光相变硬化处理的工艺参数对硬化层显微组织、硬化深度、显微硬度变化以及对耐磨性能的影响。结果表明:经激光相变硬化处理后,42CrMo钢的表面层硬度可达Hv1150,硬化层的显微组织主要是高缺陷密度的隐针马氏体。与常规淬火处理相比,显微硬度提高一倍多,耐磨性提高四倍左右。最后探讨了激光相变硬化的机理。
|
| 关 键 词： | 激光加热 合金钢 锰络钢 热处理 |
EFFECT OF LASER TRASFORMATION HARDENING ON STRUCTURE AND PROPERTIES OF 42CrMo STEEL |
| |
| Ma Deyan Tang Furong.EFFECT OF LASER TRASFORMATION HARDENING ON STRUCTURE AND PROPERTIES OF 42CrMo STEEL[J].Journal of Southwest Petroleum Institute,1993,15(2):90-94. |
| |
| Authors: | Ma Deyan Tang Furong |
| |
| Affiliation: | Ma Deyan Tang Furong (Department of Basic Courses) Xie Jiangsheng Peng Shengshang (Dept. of Mechanical Engineering) |
| |
| Abstract: | This paper studies the laser transformation hardening of 42CrMo steel at low temperature tempering condition, and carries out experiments on the effect of technical parameters of laser treatment on the microstructures, on the depth of laser hardening, and on the change of hardness in the hardening layer and wearing resistance. The results from experiments show that the microhardness of laser hardened zone may be as high as Hv1150. The microstructures are mainly oryptocrystalline martensite with a high density of dislocation. Its microhardness can be doubled, and its wearing resistance can be increased by four times or so. At the end, the paper discusses the mechanism of laser transformation hardening. |
| |
| Keywords: | Laser heating Surface hardening Metallographic examination Microstructure Wear resistance |
| 本文献已被 CNKI 维普 等数据库收录！ |
