| 基于Pro/E的螺旋面钻尖刃磨机床运动仿真 |
| |
| 引用本文： | 虞文武,靳敏,张小强.基于Pro/E的螺旋面钻尖刃磨机床运动仿真[J].煤矿机械,2007,28(1):46-48. |
| |
| 作者姓名： | 虞文武 靳敏 张小强 |
| |
| 作者单位： | 1. 东北大学,沈阳,110004
2. 中国矿业大学,江苏,徐州,221008 |
| |
| 摘 要： | 给出螺旋面钻尖刃磨机床的基本结构及其工作原理。采用Pro/E对零部件进行三维参数化建模。在此基础上进行虚拟装配包括定义运动副连接、设置伺服电机,完成螺旋面钻尖刃磨机床的装配体模型。最后通过此模型利用Mechanism模块实现螺旋面钻尖刃磨的运动仿真,并完成干涉检查、速度等运动分析。
|
| 关 键 词： | Pro/E 运动仿真 并联杆刃磨机床 螺旋面钻尖 |
| 文章编号： | 1003-0794（2007）01-0046-03 |
| 修稿时间： | 2006-08-09 |
Kinematical Smulation of Helical Drill Point Grinding Based on Pro/E |
| |
| YU Wen-wu,JIN Min,ZHANG Xiao-qiang.Kinematical Smulation of Helical Drill Point Grinding Based on Pro/E[J].Coal Mine Machinery,2007,28(1):46-48. |
| |
| Authors: | YU Wen-wu JIN Min ZHANG Xiao-qiang |
| |
| Affiliation: | 1. Northeastvm University, Shenyang 110004, China ;2. China University of Mining and Technology, Xuzhou 221008, China |
| |
| Abstract: | Basic structure and operation principle of the parallel grinder for helical drill point grinding is presented. Three dimensional models for each parts of the grinder are obtained by the parameterized design method based on the Pro/E. Assembling model is finished after-defining the joints, anti setting servomotors. Kinematical simulation of the grinding is performed with the assembling model by the meehanism module of the Pro/E at last. Further more interference checking and the velocity analysis are also gained. |
| |
| Keywords: | Pro/E kinematical simulation parallel grinder helical drill point |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
