首页 | 本学科首页   官方微博 | 高级检索  
     

碳纳米管/聚丙烯腈基复合材料的热导率研究
引用本文:温伟,王彪,王华平. 碳纳米管/聚丙烯腈基复合材料的热导率研究[J]. 材料导报, 2009, 23(22)
作者姓名:温伟  王彪  王华平
作者单位:东华大学纤维材料改性国家重点实验室,上海,201620
基金项目:留学回国人员科研启动基金,上海市重点学科建设项目,"111"引智计划 
摘    要:采用原位聚合法制备了碳纳米管/聚丙烯腈(CNT/PAN)复合材料,用MDSC的测试方法研究了复合材料的热性能,并由此推导了复合材料的热导率.应用Cheng-Vachon、Nielsen-Lewis和Okamoto-Ishida 3种导热理论模型对CNT/PAN复合材料的热导率进行估算.对比实验测试与导热理论模型的计算结果,考虑到碳纳米管在聚合物基体中的分散和取向情况,得出Nielsen-Lewis理论在低填充含量及室温条件下可以较准确地估算无规分散的CNT/PAN复合材料体系的热导率.

关 键 词:碳纳米管/聚丙烯腈复合材料  导热理论模型  热导率  比热容

Studies on Thermal Conductivity of Carbon Nanotubes/Polyacrylonitrile Composites
WEN Wei,WANG Biao,WANG Huaping. Studies on Thermal Conductivity of Carbon Nanotubes/Polyacrylonitrile Composites[J]. Materials Review, 2009, 23(22)
Authors:WEN Wei  WANG Biao  WANG Huaping
Abstract:The carbon nanotubes/polyacrylonitrile(CNT/PAN) nanocomposites are prepared using in-situ polymerization method. The thermal properties of the composites are measured by MDSC test and the thermal conductivity of the composites is calculated. Three theoretical thermal conductivity models including Cheng-Vachon, Nielsen-Lewis and Okamoto-Ishida models have been proposed respectively to predict the effective thermal conductivity of carbon nanotubes/polyacrylonitrile(CNT/PAN) composites. Compared with the calculation of the experiment, the theoretical equations are discussed in terms of the dispersion and orientation. The experimental data are in good agreement with that obtained from Nielsen-Lewis thermal conductivity theoretical model under the condition of low filler content at room temperature.
Keywords:CNT/PAN  theoretical thermal conductivity models  thermal conductivity  heat capacity
本文献已被 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号