| 数字伺服压力机控制系统的研究 |
| |
| 引用本文： | 叶春生,侯文杰,张军伟,莫健华,樊自田. 数字伺服压力机控制系统的研究[J]. 锻压技术, 2009, 34(6). DOI: 10.3969/j.issn.1000-3940.2009.06.031 |
| |
| 作者姓名： | 叶春生 侯文杰 张军伟 莫健华 樊自田 |
| |
| 作者单位： | 华中科技大学材料成形及模具技术国家重点实验室,湖北,武汉,430074 |
| |
| 基金项目： | 国家自然科学基金资助项目 |
| |
| 摘 要： | 根据曲柄连杆压力机工艺要求和伺服电机控制的原理,提出基于现场总线的ARM控制系统并对控制系统的软硬件及其组成进行了分析和研究.由于采用低成本、高性能32位的ARM控制器,系统可根据压力加工控制的要求,重新架构控制系统并由CAN总线实现通讯和并行控制,其中每个子功能模块都具有独立的控制和通讯功能,易于组态复杂控制系统.
|
| 关 键 词： | 数字化 伺服压力机 控制系统 现场总线 |
Research on control system of numerical crank servo press |
| |
| YE Chun-sheng,HOU Wen-jie,ZHANG Jun-wei,MO Jian-hua,FAN Zi-tian. Research on control system of numerical crank servo press[J]. Forging & Stamping Technology, 2009, 34(6). DOI: 10.3969/j.issn.1000-3940.2009.06.031 |
| |
| Authors: | YE Chun-sheng HOU Wen-jie ZHANG Jun-wei MO Jian-hua FAN Zi-tian |
| |
| Abstract: | According to the features and processing requirement of crank and connecting rod and servo motor control principle, the ARM control system based on the field-bus was designed, and the software, hardware and composition of the control system were introduced. Because of the low-cost, high-performance 32 - bit core ARM controller, the system can be reconstructed according to needs of crank processing, which can communicate via CAN bus and realize multi-parallel control. Every sub-function modules has a independent control and communication function. It is easy to eonfigurate a complex control system. |
| |
| Keywords: | numerical servo press system control system field-bus |
| 本文献已被 万方数据 等数据库收录！ |
|
