Deep Purification of Zinc Ammoniacal Leaching Solution |
| |
Authors: | LI Jian CHEN Qi-yuan HU Hui-ping WANG Wei-zhen |
| |
Affiliation: | Institute of Metallurgical and Applied Physico-Chemistry, School of Chemistry and Chemical Engineering, Central South University College of Chemistry and Chemical Engineering, Central South University College of Chemistry and Chemical Engineering, Central South University College of Chemistry and Chemical Engineering, Central South University |
| |
Abstract: | Deep purification of zinc ammoniacal leaching solution by cementation using zinc dust was studied. The effects of relative amount of metallic impurities, dosage of zinc dust, purification time, temperature, pH value and total ammonia concentration in the solution on the purification of the solution were investigated. The results indicate that total ammonia concentration in the solution had no effect on the purification, but relative amount of metallic impurities, dosage of zinc dust, purification time, temperature and pH value of the solution were the main factors influencing the purification. Keeping appropriate molar ratio of copper to cadmium or nickel to cadmium was beneficial to the cementation of cadmium. Nevertheless, the presence of cobalt went against the cementation of cadmium and cobalt. All metallic impurities could be decreased to acceptable levels under the optimized conditions of 2 g/L of zinc dust dosage, 1 h of purification time, 35℃, pH value 9.03 of zinc ammoniacal leaching solution. The deeply purified zinc ammoniacal solution obtained by one-stage purification meets the requirements of zinc electrowinning. |
| |
Keywords: | zinc ammoniacal leaching solution zinc dust deep purification relative amount of metallic impurities |
|
| 点击此处可从《过程工程学报》浏览原始摘要信息 |
|
点击此处可从《过程工程学报》下载全文 |
|