| 安钢低碳贝氏体钢生产的板形控制 |
| |
| 引用本文： | 白锦函,孔德南,李娜.安钢低碳贝氏体钢生产的板形控制[J].四川冶金,2011,33(5):29-31. |
| |
| 作者姓名： | 白锦函 孔德南 李娜 |
| |
| 作者单位： | 安阳钢铁股份有限公司,河南安阳,455004 |
| |
| 摘 要： | 安钢生产的低碳贝氏体钢出现瓢曲现象主要是在冷却过程中形成.出现瓢曲的主要原因是钢板在通过层流冷却系统时,在厚度方向和横向方向冷却不均匀造成的.本文分析板形缺陷,研究纵向、厚度方向及纵向的板形控制方法,并制定了相应的措施,达到了改善板形的目的.
|
| 关 键 词： | 低碳贝氏体钢 控制冷却 板形 |
THE PRODUCTION OF LOW CARBON BAINITIC STEEL SHAPE CONTROL |
| |
| Bai Jinhan,Kong Denan,Li Na.THE PRODUCTION OF LOW CARBON BAINITIC STEEL SHAPE CONTROL[J].Sichuan Metallurgy,2011,33(5):29-31. |
| |
| Authors: | Bai Jinhan Kong Denan Li Na |
| |
| Affiliation: | Bai Jinhan Kong Denan Li Na(Anyang lron ＆ Steel Stock Co.,Ltd,Anyang,Henan 455004,China)) |
| |
| Abstract: | On the production of low carbon bainitic steel buckling phenomenon occurs mainly formed during the cooling process.The main reason there is a buckling plate in laminar flow through the cooling system,in the thickness direction and lateral direction caused by uneven cooling.This paper analyzes the shape defect of the longitudinal,vertical thickness and shape control method,and formulate corresponding measures to achieve the purpose of improving the shape. |
| |
| Keywords: | low carbon bainitic steel controlled cooling shape |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
