| 仿生非光滑注射器针头注射过程接触有限元模拟 |
| |
| 引用本文： | 王京春,左文杰,高元明,葛长江,任露泉.仿生非光滑注射器针头注射过程接触有限元模拟[J].吉林大学学报(工学版),2010,40(3). |
| |
| 作者姓名： | 王京春 左文杰 高元明 葛长江 任露泉 |
| |
| 作者单位： | 1. 吉林大学工程仿生教育部重点实验室,长春,130022
2. 吉林大学机械科学与工程学院,长春,130022 |
| |
| 基金项目： | 国家自然科学基金项目(50875108);;吉林大学研究生创新基金项目(2009-2007) |
| |
| 摘 要： | 应用接触非线性有限元方法对普通针头及两种分别具有锯齿形和波纹形仿生非光滑表面针头的注射过程进行了数值模拟,求得了软组织在该过程中应力、速度、动能和内能的变化时间历程,直观描述了非光滑表面对针头在注射这一动态过程中的影响。通过三种针头的对比和分析表明,仿生非光滑针头具有减阻和减痛效果,并且具有波纹形非光滑表面的针头效果更加明显,与试验研究结果吻合。
|
| 关 键 词： | 工程仿生学 仿生非光滑 接触有限元法 注射器针头 |
Contact finite element simulation of bionic non-smooth injector needle during injection process |
| |
| WANG Jing-chun,ZUO Wen-jie,GAO Yuan-ming,GE Chang-jiang,REN Lu-quan.Contact finite element simulation of bionic non-smooth injector needle during injection process[J].Journal of Jilin University:Eng and Technol Ed,2010,40(3). |
| |
| Authors: | WANG Jing-chun ZUO Wen-jie GAO Yuan-ming GE Chang-jiang REN Lu-quan |
| |
| Affiliation: | 1.Key Laboratory of Bionic Engineering of Ministry of Education;Jilin University;Changchun 130022;China;2.College of Mechanical Science & Engineering;China |
| |
| Abstract: | The numerical simulations were performed for the injection process of the common injector needle and two kinds of injector needles with zigzag and wave shape non-smooth surfaces using the non-linear contact finite element method.The histories of the stress,the velocity,the kinetic energy,and the internal energy in the human soft tissue were obtained,demonstrating intuitively the effects of the non-smooth surface during the dynamic process of injection.Comparison among these three kinds of injector needles s... |
| |
| Keywords: | engineering bionics bionic non-smoothness contact finite element method injector needle |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
