| 分段多点成形过程有限元数值模拟关键技术研究 |
| |
| 引用本文： | 陈建军,李明哲,严庆光,裴永生.分段多点成形过程有限元数值模拟关键技术研究[J].中国机械工程,2003,14(16):1364-1367. |
| |
| 作者姓名： | 陈建军 李明哲 严庆光 裴永生 |
| |
| 作者单位： | 吉林大学辊锻工艺研究所 |
| |
| 基金项目： | “十五”国家重点科技攻关项目 ( 2 0 0 1BA2 0 3 B11)，吉林大学青年教师基金资助项目，教育部跨世纪优秀人才基金资助项目 |
| |
| 摘 要： | 分段多点成形是一种新的大型板材成形方法，对该成形过程进行数值模拟是预测成形缺陷、分析成形质量的有效手段。提出利用动力显式算法分析板料成形过程，利用静力隐式算法分析回弹过程，从而为分段多点成形过程的多工步数值模拟提供了一个可行的解决方案。对其中的一些关键技术的实现进行了研究，提出了相应的解决方法并通过实例证实了其有效性。
|
| 关 键 词： | 板材成形 有限元 数值模拟 多点成形 |
| 文章编号： | 1004-132X(2003)16-1364-04 |
Study on Key Techniques for FEM-based Numerical Simulation of Sectional Multi-point Forming Process |
| |
| Chen Jianjun.Study on Key Techniques for FEM-based Numerical Simulation of Sectional Multi-point Forming Process[J].China Mechanical Engineering,2003,14(16):1364-1367. |
| |
| Authors: | Chen Jianjun |
| |
| Abstract: | Sectional multi-point forming is a new technology for large size sheet metal. Numerical simulation is an effective means for the prediction of its deformation defects and the analysis of its deformation quality. A feasible method is proposed for the multi-operation numerical simulation, in which a dynamic explicit algorithm is used to analyze the forming process and a static implicit algorithm is used to analyze springback process. Some key techniques of the method are discussed and relevant solving ways are put forward. And the validity of the method is supported by some examples. |
| |
| Keywords: | sheet metal forming finite element method numerical simulation multi-point forming |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
