| 喷射器内胶液流动数值仿真 |
| |
| 引用本文： | 李士会,何将三,邓圭玲.喷射器内胶液流动数值仿真[J].电子工业专用设备,2006,35(4):51-54. |
| |
| 作者姓名： | 李士会 何将三 邓圭玲 |
| |
| 作者单位： | 中南大学机电工程学院,湖南,长沙,410083 |
| |
| 基金项目： | 自然科学基金面上项目(50475138)，自然科学基金重大项目(50390064)。 |
| |
| 摘 要： | 胶液喷射技术现广泛应用于表面贴装工艺领域。在流固耦合仿真中,对流体动边界的处理是一个难点。利用ANSYS流固耦合作用工具FSI及任意拉格朗日欧拉法对胶液喷射器内胶液流动过程进行了研究。得到喷针运动下胶液喷射器内胶液的压力及速度分布,证明了该方法的有效性,并得出喷针运动直接影响胶液喷射技术实现的结论。
|
| 关 键 词： | 表面贴装工艺 胶液喷射分配 流固耦合 任意拉格朗日欧拉法 |
| 文章编号： | 1004-4507(2006)04-0051-04 |
| 收稿时间： | 03 8 2006 12:00AM |
| 修稿时间： | 2006年3月8日 |
Numerical Simulation of Fluid Flow in Jetting Dispenser |
| |
| LI Shi-hui,HE Jiang-san,DENG Gui-ling.Numerical Simulation of Fluid Flow in Jetting Dispenser[J].Equipment for Electronic Products Marufacturing,2006,35(4):51-54. |
| |
| Authors: | LI Shi-hui HE Jiang-san DENG Gui-ling |
| |
| Affiliation: | College of Mechanical and Electrical Engineering, Central South University,Chang-sha 410083, China |
| |
| Abstract: | Fluid dispensing technology is widely applied in Surface Mount Technology (SMT).In numerical simulations of fluid-structure interaction, problems of moving boundary of fluid is still difficult to solve. In this paper; we present a computational study of the jetting process using ANSYS fluid-structure interaction (FSI) analysis tools and .Arbitrary Lagrangian-Eulerian (ALE) Formulation. The distribution of pressure and velocity of adhesive in the jetting dispenser is obtained with the needle moving downwards. Results show that the solution is effective. Also the conclusion that the movement of the needle influences the accomplishment of jetting is obtained. |
| |
| Keywords: | Surface Mount Technology Jet dispensing FSI ALE |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
