The preparatory optimal conditions of barium titanate thin film from a hydrothermal method at low temperature |
| |
| Authors: | Kun-Ming Hung Ching-Shieh Hsieh Wein-Duo Yang Yi-Jiun Sun |
| |
| Affiliation: | (1) Department of Cosmetic Application and Management, Yung Ta Institute of Technology & Commerce, Lin-Luoh, Pingtung, 909, Taiwan;(2) Department of Applied Chemistry, Fooyin University, Ta-Liao, 831, Taiwan;(3) Department of Chemical and Materials Engineering, National Kaohsiung University of Applied Sciences, Kaohsiung, 80807, Taiwan |
| |
| Abstract: | The preparation of barium titanate thin films on Ti substrates at low temperature using the hydrothermal process was studied.
In addition, the interface relationship between film and substrate was investigated, revealing that the Ba2+ ion diffused into the Ti(OH)4 gel formed by Ti in a strong alkaline solution, resulting in a homogeneous film. A 3-level orthogonal array design was utilized
to optimize the experimental conditions. The effects of preparatory conditions such as the barium-concentration, NaOH concentration,
reaction time and substrate surface treatment were systematically studied. Results indicate that the effects of the NaOH concentration
and substrate surface treatment are the significant variables influencing the relative crystal intensity (intensity of (110)
BaTiO3 peaks in XRD spectrum/intensity of (001) Ti peak in XRD spectrum) of the films obtained. Polycrystalline, BaTiO3-films were obtained, with improved crystallinity and a dielectric constant of about 915 at 1 MHz. |
| |
| Keywords: | |
| 本文献已被 SpringerLink 等数据库收录！ |
|
