| 夹持式镦粗过程夹紧力的分析研究 |
| |
| 引用本文： | 李群智,李双义,王树新.夹持式镦粗过程夹紧力的分析研究[J].现代制造工程,2003(8):50-53. |
| |
| 作者姓名： | 李群智 李双义 王树新 |
| |
| 作者单位： | 天津大学机械学院113信箱,300072 |
| |
| 摘 要： | 应用滑移线理论和金属的塑性变形理论,分析研究圆柱体镦粗过程中的夹紧力的计算方法,并与试验结果进行比较.计算结果与试验结果吻合.
|
| 关 键 词： | 滑移线理论 夹紧力 梯形齿 |
| 文章编号： | 1671-3133(2003)08-0050-04 |
| 修稿时间： | 2003年3月18日 |
The analysis and study of clamping force during forging reduction of the nipping type |
| |
| Li QunZhi,Li Shuangyi,Wang Shuxin.The analysis and study of clamping force during forging reduction of the nipping type[J].Modern Manufacturing Engineering,2003(8):50-53. |
| |
| Authors: | Li QunZhi Li Shuangyi Wang Shuxin |
| |
| Abstract: | Based on the theory of slip line and plastic deformation of metal,the clamping force for forging reduction of cylinder is analyzed and studied.And the result of evaluation is well consistent with that of experiment. |
| |
| Keywords: | Theory of slip line Clamp force Stepped tooth |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
