首页 | 本学科首页   官方微博 | 高级检索  
     

3种聚合物薄膜拉伸状态下的绝缘强度研究
引用本文:郭昱延,李卫国,杨鑫,张宏杰,魏斌,丘明.3种聚合物薄膜拉伸状态下的绝缘强度研究[J].绝缘材料,2012(4):53-54,59.
作者姓名:郭昱延  李卫国  杨鑫  张宏杰  魏斌  丘明
作者单位:1. 华北电力大学 电气与电子工程学院,北京 102206
2. 中国电力科学研究院 电工与新材料研究所,北京 100192
基金项目:国家高技术研究发展计划(863)项目(2009AA03Z209)
摘    要:研究了聚四氟乙烯(PTFE)、聚酰亚胺薄膜(PI)、聚丙烯层压纸(PPLP)3种聚合物薄膜经液氮浸泡和冷热循环后在拉伸状态下的电气绝缘强度,并与未处理的样品进行对比。结果表明:未处理时,PI薄膜的工频绝缘强度最大;经液氮浸泡后,PTFE和PI薄膜的工频绝缘强度相当,而PPLP薄膜的工频绝缘强度相对稳定。

关 键 词:绝缘强度  聚合物薄膜  拉伸状态

The Insulation Strength of Three Types of Polymer Films Under Tensile Condition
Guo Yuyan,Li Weiguo,Yang Xin,Zhang Hongjie,Wei Bin,Qiu Ming.The Insulation Strength of Three Types of Polymer Films Under Tensile Condition[J].Insulating Materials,2012(4):53-54,59.
Authors:Guo Yuyan  Li Weiguo  Yang Xin  Zhang Hongjie  Wei Bin  Qiu Ming
Affiliation:1.School of Electrical and Electronic Engineering,North China Electric Power University,Beijing 102206,China;2.Electrical Engineering and New Material Department,China Electric Power Research Institute,Beijing 100192,China)
Abstract:The electrical insulation strength of three types of polymer films,polytetrafluoroethylene(PTFE),polyimide(PI) and polypropylene laminate(PPLP),which were under tensile condition and after immersed in liquid nitrogen and thermocycling,was studied,and then was compared with that of untreated samples.The results show that the insulation strength of untreated PI film at power frequency is the largest.The insulation strength of the PTFE is equivalent to that of the PI after immersed in liquid nitrogen.The insulation strength of the PPLP is relatively stable.
Keywords:insulation strength  polymer film  tensile condition
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号