Tuning activity of Pt/FeOx/TiO2 catalysts synthesized through selective-electrostatic adsorption for hydrogen purification by prox reaction |
| |
| Affiliation: | 1. Department of Chemical Engineering, Biotechnology and Materials, FCFM, University of Chile, Santiago, Chile;2. Department of Physics, University of Concepción, Concepción, Chile;3. Department of Chemical Engineering, University of Notre Dame, Notre Dame, USA;4. School of Chemical Sciences and Engineering, Yachay Tech University, Urcuquí, Ecuador |
| |
| Abstract: | Hydrogen purification by removing CO traces was studied via the preferential CO oxidation (PROX) reaction using highly dispersed Pt catalysts supported on dual oxide FeOx/TiO2. These catalysts were prepared by the strong electrostatic adsorption (SEA) method by varying the pH of synthesis and the calcination temperature. By measuring the point of zero charge (PZC) of the support components, it was possible to determine the pH in which Pt can be selectively deposited onto one of the support components, obtaining Pt dispersion values above 90%. The selective SEA of a Pt precursor onto the co-support (FeOx) was achieved at a synthesis pH between the PZCs of the support components (i.e., TiO2 PZC = 5.2 and Fe2O3 PZC = 6.9) by using a Pt anionic complex. The catalytic activity for the PROX reaction, expressed in terms of the CO conversion, O2 selectivity to CO2, apparent activation energy, and turnover frequency, confirmed that the SEA prepared catalysts were active and selective for the PROX reaction. XPS and TPR results of the Pt/FeOx/TiO2 catalysts showed the formation of Pt-FeOx interfaces, called as (Pt-FeOx)i interfacial sites, which enhanced the stability and catalytic activity for the PROX reaction. The concentration of these sites can be controlled by the synthesis conditions used, mainly pH and to a lower extent the calcination temperature. |
| |
| Keywords: | Selective-strong electrostatic adsorption PROX reaction Pt catalyst Iron oxide |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
