首页 | 本学科首页   官方微博 | 高级检索  
     

从某高硫铝土矿中浮选分离硫铝试验研究
引用本文:宋翔宇.从某高硫铝土矿中浮选分离硫铝试验研究[J].湿法冶金,2012(4):243-247.
作者姓名:宋翔宇
作者单位:河南省岩石矿物测试中心;河南省矿物加工与生物选矿工程技术研究中心
摘    要:山西某高硫铝土矿中硫质量分数达2.95%,采用浮选分离工艺得到铝土矿精矿和硫铁矿精矿。铝土矿精矿中,硫质量分数降至0.34%,Al2O3回收率为96.16%,满足后续氧化铝生产工艺要求;硫铁矿精矿中硫质量分数为45.83%,达到优等-Ⅱ级硫精矿质量标准。该工艺有效解决了高硫铝土矿硫、铝资源的综合回收问题。

关 键 词:高硫铝土矿  浮选  铝土矿精矿  硫铁矿精矿  回收

Experimental Study on Separation of Sulfur and Aluminum Minerals From High Sulfur Bauxite by Floatation
SONG Xiang-yu.Experimental Study on Separation of Sulfur and Aluminum Minerals From High Sulfur Bauxite by Floatation[J].Hydrometallurgy of China,2012(4):243-247.
Authors:SONG Xiang-yu
Affiliation:SONG Xiang-yu1,2(1.The Rock and Mineral Test Centre of He’nan Province,Zhengzhou 450012,China; 2.Mineral Processing and Biobeneficiation Engineering Technology Research Center of Henan Province, Zhengzhou 450012,China)
Abstract:The sulfur content in a high-sulfur bauxite is 2.95%.Flotation separation process is used to obtain qualified bauxite concentrate and pyrite concentrate,respectively.The bauxite concentrate in which S grade is 0.34% and Al2O3 recovery of 96.16% is obtained at optimum conditions.The bauxite concentrate can meet the production requirements of aluminum oxide.The sulfur content in pyrite concentrate reaches 45.83%,accorded with national quality standards of superior-Ⅱ grade pyrite concentrate.Both sulfur and aluminum in high-sulfur bauxite are recovered effectively.
Keywords:high-sulfur bauxite  flotation  pyrite concentrate  bauxite concentrate  recovery
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号