首页 | 本学科首页   官方微博 | 高级检索  
     

基于IR2132驱动电路的应用设计
引用本文:郭光荣,薛斌,张云龙,胡亮.基于IR2132驱动电路的应用设计[J].兵工自动化,2006,25(5):69-70.
作者姓名:郭光荣  薛斌  张云龙  胡亮
作者单位:中国兵器工业第五八研究所,军品部,四川,绵阳,621000;中国兵器工业第五八研究所,军品部,四川,绵阳,621000;中国兵器工业第五八研究所,军品部,四川,绵阳,621000;中国兵器工业第五八研究所,军品部,四川,绵阳,621000
摘    要:基于IR2132驱动器的TMS320LF2407A测试板驱动电路,由自保护和过电流及欠电压保护组成,并选择长线传输分配脉冲信号.电流在反馈电阻上产生的电压超出设定值时,IR2132启动内部保护电路,关断输出通道,实现电流保护.若负载或驱动电路出现过电流或欠电压,IR2132的FAULT引脚输出制动信号,拉低PDPINT引脚输入电平,关断DSP输出通道并置为高阻态,实现整个控制电路保护.

关 键 词:TMS320LF2407A  IR2312  驱动电路  电路保护
文章编号:1006-1576(2006)05-0069-02
收稿时间:2005-11-23
修稿时间:2006-01-04

Application Design Based on R2132 Drive Circuit
GUO Guang-rong,XUE Bin,ZHANG Yun-long,HU Liang.Application Design Based on R2132 Drive Circuit[J].Ordnance Industry Automation,2006,25(5):69-70.
Authors:GUO Guang-rong  XUE Bin  ZHANG Yun-long  HU Liang
Affiliation:Dept. of Military Products, No.58 Institute of China Ordnance Industries, Mianyang 621000, China
Abstract:The drive circuit of alpha stage TMS320LF2407A is based on the IR2132 driver. It consists of self-protection, over-current and ill-voltage protection. The long-transmission was chosen to assign impulse signals. When the voltage on the feedback resistance over the designed value, the inside protection circuit was operated and the output channels were cut in IR2132 to achieve current protection. If over-current or ill-voltage was appeared in load or drive circuit, the trig signals were outputted by FAULT pin of IR2132; then, the input voltage of PDPINT was lower; the DSP output channels were closed and set as high value; at last, the entire control circuit protection was achieved.
Keywords:TMS320LF2407A  IR2132  Drive circuit  Circuit protection
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号