| 基于Workbench车辆减振器弹簧盘的疲劳分析 |
| |
| 引用本文： | 李先锋,杨建伟,贾志绚.基于Workbench车辆减振器弹簧盘的疲劳分析[J].北京建筑工程学院学报,2012,28(2):50-55. |
| |
| 作者姓名： | 李先锋 杨建伟 贾志绚 |
| |
| 作者单位： | 太原科技大学机械工程学院,太原,030024;北京建筑工程学院机电与汽车工程学院,北京,100044 |
| |
| 基金项目： | 国家自然科学基金项目，北京市属高等学校人才强教计划资助项目，北京市优秀人才培养资助项目 |
| |
| 摘 要： | 车辆减振器弹簧盘在不断受到弹簧交变挤压力作用下,极易发生疲劳损坏.本文建立了弹簧盘的有限元模型,基于ANSYS-Workbench平台,对弹簧盘进行静力学强度和疲劳分析,预测了弹簧盘疲劳寿命的大小,获得了弹簧盘变形、应力集中及疲劳损伤的大小及位置,得到弹簧盘应力集中和疲劳损伤均发生于弹簧盘凸包区域的结论,验证其疲劳寿命符合设计要求,为其进一步改进设计提供参考依据.
|
| 关 键 词： | 弹簧盘 有限元分析 疲劳寿命 |
Fatigue Analysis for Spring Plate of Vehicle Shock Absorber Based on Workbench |
| |
| Li Xianfeng,Yang Jianwei,Jia Zhixuan.Fatigue Analysis for Spring Plate of Vehicle Shock Absorber Based on Workbench[J].Journal of Beijing Institute of Civil Engineering and Architecture,2012,28(2):50-55. |
| |
| Authors: | Li Xianfeng Yang Jianwei Jia Zhixuan |
| |
| Affiliation: | 1(1.School of Mechanical Engineering,Taiyuan University of Science and Technology,Taiyuan 030024; 2.School of Mechanical-Electronic and Automobile Engineering,BUCEA Beijing 100044) |
| |
| Abstract: | The spring plate of vehicle shock absorber is very prone to fatigue damage when continuously extruded by various spring forces.On the ANSYS-Workbench platform,the finite element model of spring plate is established;the static strength and the fatigue damage of spring plate are analysed and the fatigue life of spring plate is predicted.Then the size and position of the spring plate deformation,the stress concentration and fatigue damage are defined,and the conclusion that the spring plate stress concentration and fatigue damage occurs in the same place—convex hull area comes out.Eventually,it is verified that the fatigue life of spring plate meets the design requirements.Fatigue simulation analysis of spring plate may act as a reference for the further improvement of the design of spring plate. |
| |
| Keywords: | spring plate finite element analysis fatigue life |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
