| 微型多槽道平板热管传热特性分析及最大传热量预测 |
| |
| 引用本文： | 刘晓为a,辛欣a,霍明学a,徐磊a.微型多槽道平板热管传热特性分析及最大传热量预测[J].传感技术学报,2007,20(9):2103-2107. |
| |
| 作者姓名： | 刘晓为a 辛欣a 霍明学a 徐磊a |
| |
| 作者单位： | 哈尔滨工业大学MEMS中心,哈尔滨,150001 |
| |
| 摘 要： | 对三角形槽道的微型平板热管,进行流动、传热性能的理论分析和模拟.建立了微型平板热管的一维稳态模型,以分析工质在热管内的轴向分布,液体和蒸汽压力、流速的轴向变化,并计算其最大传热量.该模型更精确地考虑了具有互相连通蒸汽空间的平板热管,汽液界面剪切摩擦力对其传热性能影响,模型预测结果与实验数据取得较好的符合,能够更准确地预测微热管的最大传热量.该模型可用来帮助微型多槽道平板热管的结构设计.
|
| 关 键 词： | 三角形槽道 平板热管 一维稳态模型 最大传热量 |
| 文章编号： | 1004-1699（2007）09-2103-05 |
| 收稿时间： | 2007-03-23 |
| 修稿时间： | 2007-03-232007-04-23 |
Thermal Analysis and Maximum Heat Transport of a Micro Flat Heat Pipe
with Axial Triangle Grooves |
| |
| Liu Xiaowei,a Xin Xin,a Huo Mingxue,a Xu Lei.Thermal Analysis and Maximum Heat Transport of a Micro Flat Heat Pipe
with Axial Triangle Grooves[J].Journal of Transduction Technology,2007,20(9):2103-2107. |
| |
| Authors: | Liu Xiaowei a Xin Xin a Huo Mingxue a Xu Lei |
| |
| Affiliation: | MEMS Center, Harbin Institute of Technology, Harbin 150001, China |
| |
| Abstract: | The paper addresses theoretical analysis and modeling of micro flat heat with axially triangle grooves with regard to the capillary limit. An one-dimensional steady-state model is developed, which takes into account the effect of interracial shear stress on the heat transport performance more precisely. The outputs of this model contain axial variation of pressure difference between vapor and liquid, velocity of liquid and vapor and meniscus radius of working liquid distribution. In addition maximum heat transport capacity of MHP is calculated. The results predicted by the model are compared with the published results in literature and show good agreement. The model can be used to assist MHP structural design. |
| |
| Keywords: | triangle grooves flat heat pipe 1-D steadv-state model-maximum heat transport |
| 本文献已被 维普 万方数据 等数据库收录！ |
| 点击此处可从《传感技术学报》浏览原始摘要信息 |
|
点击此处可从《传感技术学报》下载全文 |
|
