首页 | 本学科首页   官方微博 | 高级检索  
     

铁屑还原浸出低品位软锰矿工艺研究
引用本文:施雯,颜文斌,熊邵锋.铁屑还原浸出低品位软锰矿工艺研究[J].矿冶工程,2012,32(1):84-86.
作者姓名:施雯  颜文斌  熊邵锋
作者单位:吉首大学 化学化工学院, 湖南 吉首 416000
摘    要:对低品位软锰矿还原浸出工艺进行了研究, 以铁屑作为还原剂, 在硫酸存在的条件下还原浸出软锰矿。通过单因素实验确定软锰矿铁屑还原浸出的最佳工艺条件为:铁屑与软锰矿质量比(简称铁矿比)为0.25∶1, 酸矿质量比为1∶1, 液固比为5∶1, 反应时间为1 h, 初始反应温度为10 ℃。在最佳浸出工艺条件下, 软锰矿中锰的浸出率达到98%以上。

关 键 词:浸出  锰矿  软锰矿  还原  铁屑  
收稿时间:2011-08-23

Technical Study on Leaching Low-grade Pyrolusite Using Scrap Iron as Reductant
SHI Wen , YAN Wen-bin , XIONG Shao-feng.Technical Study on Leaching Low-grade Pyrolusite Using Scrap Iron as Reductant[J].Mining and Metallurgical Engineering,2012,32(1):84-86.
Authors:SHI Wen  YAN Wen-bin  XIONG Shao-feng
Affiliation:College of Chemistry and Chemical Engineering, Jishou University, Jishou 416000, Hunan, China
Abstract:Studies on reduction leaching technology of low-grade pyrolusite were carried out.Scrap iron was used as reductant to leach low-grade pyrolusite in sulphuric acid.The optimum technical conditions of leaching pyrolusite by single-factor test were confirmed as follows: the mass ratio of scrap iron to pyrolusite was 0.25∶1,the mass ratio of sulphuric acid to pyrolusite was 1∶1,the liquid-solid ratio was 5∶1,reaction time was 1 h and initial reaction temperature was 10 ℃.The leaching rate of manganese in pyrolusite reached above 98% under the optimum leaching conditions.
Keywords:leaching  manganese ore  pyrolusite  reduction  scrap iron
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《矿冶工程》浏览原始摘要信息
点击此处可从《矿冶工程》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号