Influences of the substitution of Fe for Ni on structures and electrochemical performances of the as-cast and quenched La0.7Mg0.3Co0.45Ni2.55−xFex (x = 0–0.4) electrode alloys

In order to improve the cycle stability of the La–Mg–Ni system PuNi₃-type hydrogen storage electrode alloys, Ni in the alloy was partially substituted by Fe. The La_0.7Mg_0.3Co_0.45Ni_2.55−xFe_x (x = 0, 0.1, 0.2, 0.3, 0.4) hydrogen storage alloys were prepared by casting and rapid quenching. The effects of the substitution of Fe for Ni on the structures and electrochemical performances of the as-cast and quenched alloys were investigated in detail. The results of the electrochemical measurement indicate that the substitution of Fe for Ni obviously decreases the discharge capacity, high rate discharge capability (HRD) and discharge potential of the as-cast and quenched alloys, but it significantly improves their cycle stabilities, and its positive impact on the cycle life of as-quenched alloy is much more significant than on that of the as-cast one. The microstructure of the alloys analyzed by XRD, SEM and TEM show that the as-cast and quenched alloys have a multiphase structure which is composed of two major phases (La, Mg)Ni₃ and LaNi₅ as well as a residual phase LaNi₂. The substitution of Fe for Ni helps the formation of a like amorphous structure in the as-quenched alloy. With the increase of Fe content, the grain sizes of the as-quenched alloys significantly reduce, and the lattice constants and cell volumes of the alloys obviously increase.